D-Series Syringe Pumps - Isco

D Series Syringe Pumps: Models 65DM, 100DM, 100DX, 260D
Section 2A 65DM, 100DM, 100DX, and 260D Liquid System Connections & Accessories
The package also contains all the tubing and hardware necessary
for valve installation.
1. To attach the 2-way valve to the pump housing, use the
valve (see Figure 2A-4): spacer block and screws provided.
2. Then connect the pre-bent 1 8" stainless steel tubing from
the valve to the pump inlet. Use the 1 8" nut and ferrule to
connect the tubing at the inlet and the valve fittings to connect
the tubing at the valve.
3. Then connect the 1.5 m PTFE refill tubing (with the filter)
to the port of the 2-way valve, using the valve fittings.
or,
When connecting to pressurized sources in SFC
applications, use the 1 8" 1.5 m stainless steel tubing (P/N
60-1243-391) without a filter. An in-line filter is contained
in the CO 2 connection package.
DANGER
RISK OF INJURY. THE PRES-
SURE PRODUCED COULD BE
700 BAR. PLEASE UTILIZE
APPROPRIATE TUBING AND
CONNECTIONS NOTED IN THE
MANUAL.
Figure 2A-4 Refill kit installation
2A-6