D-Series Syringe Pumps - Isco

D Series Syringe Pumps
Section 1 Introduction
1.2 Controls and
Indicators
The pump controller, which is designed to conveniently sit on top
of the pump base, regulates all pumping functions. Controller
input is made through the keypad on the controller front panel.
The controller front panel is shown in Figure 1-5 and detailed in
Table 1-9. Table 1-8 details the key functions.
The rear panel of the pump controller contains several input and
output connectors, detailed in Table 1-10, and shown in Figure
1-6.
The only operational control on the pump itself is the mains
power switch, shown in Figure 1-8. The rear panel contains
several connectors, detailed in Table 1-11, and shown in Figure
1-7.
4
3
1
2
Figure 1-5 Pump controller key functions
Table 1-9 Pump Controller Front Panel Label
Item No. on
Figure 1-5
Connector
Description
1 On/Standby switch Turns instrument off and on.
(Does not disconnect power.)
2 Programming keypad Used to program controller.
3 Softkeys Labeled A, B, C, or D; used to select menu items
displayed on the liquid crystal display.
4 Liquid crystal display 40 Characters 4 line.
1-12