D-Series Syringe Pumps - Isco

D Series Syringe Pumps
Section 8 Continuous Flow Introduction, Installation, & Operation
for 1 16" tubing, are provided. Use the fittings appropriate
for your tubing size.
7. Tighten all fittings.
8.2.3 Inlet Tubing There are two types of inlet tubing provided with this kit. The
stainless steel tubing is to be used for a pressurized inlet source,
the PTFE tubing may be used if the source is not pressurized.
DANGER
RISK OF INJURY. THE PRESSURE PRODUCED
COULD BE 700 BAR. PLEASE UTILIZE
APPROPRIATE TUBING AND CONNECTIONS
NOTED IN THE MANUAL.
Note
The fittings for connection to pressurized source are not provided.
A CO 2 cylinder connection package (P/N 68-1247-043)
is available. Refer to section 2A.3.2 of the Instruction Manual.
8-4