D-Series Syringe Pumps - Isco

D Series Syringe Pumps
Section 5 Pump Maintenance & Repair
DANGER
RISK OF ELECTRIC SHOCK - DISCONNECT THE
ELECTRIC POWER BEFORE SERVICING. ONLY
TRAINED SERVICE PERSONNEL MAY REMOVE
THE CASE TOP.
DANGER
RISQUE DE CHOC ÉLECTRIQUE. COUPER
L´ALIMENTATION AVANT LA RÉPARATION.
L´USAGER NE DOIT PAS DÉMONTER
L´INSTRUMENT OU DÉRANGER LE MÉCANISME
DEDANS. ADRESSER LA REPARATION
SEULEMENT AUX TECHNICIENS COMPÉTENTS.
WARNING
Earth ground bonding conductor. Do not remove or
disconnect.
Mise à la terre. Ne pas enlever ni déconnecter.
WARNING
Line voltage is present inside this unit at all times,
regardless of switch settings. If internal adjustments or
repairs are necessary, the line cords must be disconnected
to remove possible shock hazard before opening the case.
5.1 Introduction The following sections contain maintenance and repair procedures
which you can do yourself or have done by a technician at
your site.
To view the schematic drawings referred to in this section, first
find the serial number for your unit. Then go to our Web site at
www.isco.com. In the left column, click Service & Support. In
the center of the page, click Fast, thorough factory repair
service. Find the blue heading Circuit Schematics and click
the indicated link. After you enter your serial number in the field
5-1