Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Site Window - 2100
Address and Neuron ID. (The last two items are for diagnostic
purposes.)
Action - Possible actions are listed in the center of the screen.
Where a match has been made between a connected module and
one in the database, the word MATCH will be displayed. Where
an action needs to be taken, a drop down list will be displayed;
use this list to select an appropriate action.
To preview the results of an action, click the ? button to the right
of a module listed in the Database Site Definitions column. After
you have selected the actions you want to take, click OK at the
bottom of the screen.
• will update
the Flowlink database with the physical module’s
configuration. Use this when the module has been
replaced and you are using a different database when
you connect.
• Add New Module will configure and add the module to
the existing site.
Connect to This Site - Depending on how you initiated the
connection, the Connect to This Site field will show one or more
site names. The data from the selected site will be used in the
Database Site Definitions section.
Create New Site - Select this check box to create a new site
from the connected physical modules. Enter a site name in the
New Site Name field.
73