Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Isco</strong> <strong>Flowlink</strong> <strong>5.1</strong> ® <strong>Software</strong><br />
Site Window - 2100<br />
• Set up the total flow calculation:<br />
Input flow rate - select the flow rate to be used in the<br />
total flow calculation.<br />
Totalizer - select the type of total flow calculation:<br />
Net, Positive, or Negative.<br />
Resolution - shift the decimal point left or right to set<br />
the desired resolution.<br />
Update total flow every - the interval between total<br />
flow calculations.<br />
• Set Up Data Storage…<br />
• Diagnostics… - Downloads and displays a text file from<br />
the module. This file reports the performance of the<br />
module and its sensor. The measurement type will<br />
determine which information is included in this report.<br />
• Hide in Measurements check box - when left unchecked,<br />
the Measurements tab displays this reading. If checked,<br />
the Measurements tab hides this reading.<br />
If you have made any changes, click on the Apply button to<br />
update the settings in the module.<br />
Zero Total Flow<br />
Total Flow<br />
Diagnostics<br />
Rainfall - 2100<br />
(2105)<br />
Cumulative flow reported will eventually reach a maximum<br />
value, depending on the flow conversion method and units<br />
selected. At this point, the total flow will roll over, just as a car’s<br />
odometer would.<br />
The Zero Total Flow button allows you to reset the cumulative<br />
flow at known intervals so that more meaningful values can be<br />
represented by this field. It is also helpful to zero the total flow<br />
after moving the flow meter to a different site.<br />
After downloading the diagnostics from the module, <strong>Flowlink</strong><br />
displays the information in the Report window. This information<br />
can be useful when evaluating the module’s performance, or<br />
when troubleshooting a problem with the assistance of Teledyne<br />
<strong>Isco</strong>’s Technical Service Department.<br />
Total Flow Diagnostics presents limited information, typically:<br />
• Date and Time - the instrument’s date and time that the<br />
report was generated.<br />
• Any fault indication associated with the Total Flow<br />
Calculation.<br />
The Rainfall tab of the Site window is used to view or change<br />
rainfall measurement settings. Access this tab by clicking the<br />
“Rainfall” label on the Measurements tab.<br />
The 2105 Interface Module can display this tab. From this tab<br />
you may:<br />
• View the Module and Measurement name.<br />
• View the total rainfall since midnight.<br />
61