Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Isco</strong> <strong>Flowlink</strong> <strong>5.1</strong> ® <strong>Software</strong><br />
Site Window - 2100<br />
W (wait for dial tone)<br />
• TCP Address - (2100 equipped w/ CDMA modem) Enter<br />
the correct static IP or public domain address.<br />
To save changes to the communications settings, click Apply.<br />
Measurements -<br />
2100<br />
Data - 2100<br />
When connected, <strong>Flowlink</strong> continually polls the site for “realtime”<br />
readings. This tab of the Site window displays the realtime<br />
readings. The number of modules and active sensors at the<br />
site will determine which readings are displayed.<br />
The Measurements tab displays the input voltage for the system.<br />
This information will aid you in determining when battery<br />
powered instruments require service.<br />
To view the real-time readings highlight the module(s) and<br />
<strong>Flowlink</strong> displays the data on the Measurements tab.<br />
To view or set the properties of a specific reading type, click on<br />
the data label. <strong>Flowlink</strong> will then display the Measurement<br />
Properties tab.<br />
When <strong>Flowlink</strong> is disconnected from the site, the last valid<br />
measurement values are shown.<br />
View and manage data storage for 2100 series modules from the<br />
Data tab of the Site window.<br />
The top list box shows the Data Storage Name of each module.<br />
Each module reports:<br />
• Max Readings - The total number of readings that the<br />
module can store.<br />
• Utilization - Displays the amount of memory in use as a<br />
percentage.<br />
• Oldest Reading - The time stamp of the oldest reading<br />
held in the module’s memory.<br />
• Data Storage Fields - Reports how many of the<br />
available storage fields are in use.<br />
When you select (highlight) a Data Storage Name, <strong>Flowlink</strong><br />
shows detailed data storage information in the lower half of this<br />
tab.<br />
The bottom list box displays measurement-specific data storage<br />
information for the module highlighted in the upper box. Each<br />
measurement type that may be stored by the module is listed in<br />
this box. Each measurement reports:<br />
• Measurement - the name of the measurement data<br />
• Primary - the primary data storage rate.<br />
• Secondary - the secondary data storage rate.<br />
• Recent reading - the time/date of the most recent<br />
reading stored in the module.<br />
• Readings - the number of readings stored in the<br />
module’s memory.<br />
52
Change language