Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Site Window - 2100
The Site window contains information that identifies the site and
all of the tabs necessary to set up the operation of the 2100 series
modules.
The top of the Site Window continuously shows three items:
• Site Name - displays the site name stored within the
instrument. Enter or modify the site name from the Site
Info tab.
• Jump to measurement tab>> button - a short cut used
to view any measurement properties tab.
• Instrument Time and Connection Status - displays
the instrument time, which is refreshed every 15 seconds,
and the current status of the communications link to the
instrument.
The tabs in the Site Window allow you to view and change many
settings that control the operation of the instrument. The
number of active tabs will depend on the type of instrument and
its data storage capabilities. Tabs that appear in the Site
Window are:
• Site Info (page 50)
• Devices (page 50)
• Measurements (page 52)
• Data (page 52)
• Measurement Properties (page 56)
• Sondes (2105), page 63
• Alarms (modem modules only), page 64
• Analog Output Channels (2108 only), page 66
• Power Control
(2102, modem modules only), page 66
• Pulse Doppler Support (page 67)
• Modbus Input (page 67)
The Measurement Properties tab is variable, meaning its label
and content will change according to which module and
measurement you have selected. Use this tab to view or change
the settings of the measurement type.
The buttons at the bottom of the Site Window are:
• Connect/Disconnect - Starts or stops communications
with the instrument.
• Retrieve Data - transfers data from the instrument to
the Flowlink database.
49