Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Menu Commands
Continue adding contacts in this manner until you have
completed the contact list for this group number.
4. To set up another group, simply select another number
from the pull down list and repeat steps 2 and 3 as
before.
To set up alarm notification:
1. In the Alarm Generation box, select the time duration for
“Alarm when a site has not reported in...”
Note that this alarm is generated only once.
2. Click the Select Site(s). In the dialogue that appears,
select the sites to be monitored.
Only sites with Alarm type SVR selected for the alarm in
the site window will send conditional alarms to the
server.
3. Select a number between 1 and 10 from the pull down list
for Alarm Notification Group.
Note: record this number for use in the 2100 Site
window’s Alarm Notification box.
4. Click Save and Flowlink creates the Alarm notification.
Note: Changes to the server alarms are reported in the Server
Logs.
Site Selection
User Management
Use the Select Sites window to choose sites. Click the check box
for each site you wish to select. To quickly select all sites, choose
the “Select All Sites” option.
Click OK to save your site selections.
The User Management tab of the Server Options window is used
by a Flowlink Pro Administrator to set up and manage user
accounts.
To set up a user account:
1. Open the Flowlink Server database using an
administrator account.
2. Click the Add button to start a new user account.
3. Enter a user name. Special characters and spaces are not
allowed in this field. An underscore (_) may be used as a
space.
4. Enter a password for the user. Please note:
• You can enter a default password. The user will be
able to choose a new password after logging into the
database.
• If a user forgets their password, an Administrator
can enter a new password.
5. Enter the user’s initials. These two characters are used
in the Server Logs.
6. Enter the Name of the user. Spaces are allowed in this
field.
44