Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Menu Commands
• Parameter (measurement type)
• Value (of the last measurement added to the database,
without units)
• Time Stamp (of last measurement)
The Recent Measurement Screen displays only selected sites. To
select a site:
1. Click the Select Site button. Flowlink opens the Site
Select window.
2. From the left half of the window, check a site to add to
the Recent Measurement Screen.
If you check the Select All check box, all sites and
measurement types in the database are added to the
Recent Measurement Screen. Be aware that “sites” in the
database may be reference curves (page 125) or imported
data (page 16), which may not need to be displayed. If
you check the Select All box, you can skip step 3 and 4;
this option also adds all measurement types.
3. From the right half of the window, check the site’s
measurements that you desire to add to the Recent
Measurement Screen. Use Select All check box to add all
measurement types.
4. Repeat steps 2 and 3 to add other sites.
5. Click the OK button. The Recent Measurement Screen
displays all of the selected data.
Graphs Command
The Graphs menu options will vary according to the type of
graph currently open. Flow Profile options are available when a
Pulse Doppler graph is active on the desktop.
Graphs>Time Series Selecting Graphs>Time Series or clicking the Time Series
button while a Graph is active on the desktop displays selected
data sets in a line graph. The Y-axis displays the units of
measure and the X-axis displays the time and date. The bottom
line in the graph window displays the timespan shown on the
graph. All displayed times are referenced to the first data set of
the first series.
Graphs>Scatterplot Selecting Graphs>Scatterplot or clicking the Scatter Graph
button while a Graph is active on the desktop displays two
selected data sets in a scatter graph format. The first series
specified is always specified on the Y-axis, and the second series
specified is always on the X-axis.
Graphs>Table Selecting Graphs>Table or clicking the Table View button
while a Graph is active on the desktop displays the data in
tabular format.
Graphs>Flow Profile
Graphing options appearing under Graphs>Flow Profile become
active when a Pulse Doppler graph is active on the desktop.
35