Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Menu Commands
• Velocity Graph: Shows the raw Doppler-based velocity
components measured by each individual beam.
• Velocity Vector Graph: Displays the Velocity Graph
measurements in an XYZ coordinate system.
• Amplitude Graph: Shows a graphical display of the
received signal strength.
• Correlation Graph: Shows a measure of the quality of
the processed velocity information.
View Edit Toolbar
View Status Bar
View Autohide
Workspace
View 2100 Prompts
View Recent
Measurements
The edit toolbar becomes active when you view measured data in
the Editor window.
• Cut, Copy, Paste, Insert Before, Insert After: Use
these commands while you are editing a data set.
• Undo All Editing: Undoes all editing to the site data.
The readings revert to the last saved version.
The status bar is shown at the bottom of Flowlink’s main window.
It displays messages about the current activity, or while it is idle
“For Help, Press F1.” The Status bar also lists the name and path
of the current database.
Flowlink displays the status bar when View>Status Bar on the
menu is checked.
The workspace graphically displays the contents of the database.
The Autohide Workspace feature lets you move smoothly and
quickly between the workspace and another window displayed on
the screen. Activate it by selecting View>Autohide Workspace.
With Autohide active, moving the mouse pointer to the far left (or
far right depending on where the workspace was docked last) will
display the workspace. The workspace will disappear again when
the focus (e.g. mouse pointer) is moved to a control other than the
workspace.
If Autohide Workspace is deselected, the Workspace window will
always be visible.
Selecting View>2100 Prompts from the Flowlink menu opens the
2100 Prompt History window. This option is only active when
Flowlink is communicating with a 2100 module.
The View>View Type>Recent Measurement Screen menu
command opens a window that can display the last measurement
of user-selected sites in the database. This window let’s you
conveniently check measurements from all sites of interest
without opening each site.
The Recent Measurement Screen displays:
• Site Name
• Device Name
34