Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Isco</strong> <strong>Flowlink</strong> <strong>5.1</strong> ® <strong>Software</strong><br />
Menu Commands<br />
File Quick Connect File>Quick Connect from the <strong>Flowlink</strong> menu or the button<br />
on the toolbar opens the Quick Connect window. The Quick<br />
Connect window is where you specify the type of connection and<br />
the settings to use for communicating with the <strong>Isco</strong> instrument.<br />
When using the Direct, Modem, and TCP connections, <strong>Flowlink</strong><br />
will locate the correct site in the database for you. If the site is<br />
not in the database, a new one will be created. When using the<br />
Wireless connection, you must identify the site before <strong>Flowlink</strong><br />
can continue.<br />
Quick Connect<br />
Pulse Doppler<br />
Quick Connect<br />
This window specifies the type of connection and the settings to<br />
use for communicating with an instrument. It can be opened by<br />
selecting File>Quick Connect from the menu, pressing F11 on<br />
your keyboard, or clicking on the Quick Connect toolbar button.<br />
When using the Direct, Modem, and TCP connections, <strong>Flowlink</strong><br />
will locate the correct site in the database for you. If the site is<br />
not in the database, a new one will be created. When using the<br />
Wireless connection, you must identify the site before <strong>Flowlink</strong><br />
can continue.<br />
Note: If you are select a Pulse Doppler instrument, you will<br />
select the instrument type from the Pulse Doppler Connect<br />
window.<br />
To connect to a site:<br />
1. Review, and update if necessary, the connection settings.<br />
2. Click on the large button that matches the type of<br />
instrument at the site.<br />
To connect to a site:<br />
1. Review, and update if necessary, the connection settings.<br />
2. Click on the large button that matches the type of<br />
instrument at the site.<br />
3. Click the Quick Connect button on the <strong>Flowlink</strong><br />
toolbar, or press F11 on the keyboard. <strong>Flowlink</strong> opens the<br />
Quick Connect window.<br />
4. Select the Type of connection- Direct or Modem.<br />
5. Check the Create new site check box and then click on<br />
the large button for pulse doppler instruments.<br />
The Pulse Doppler Connect window will appear.<br />
6. Enter a site name and a device name, and select the<br />
radio button for ADFM (Standard or HotTap), accQmin,<br />
or HADFM.<br />
Click OK, and <strong>Flowlink</strong> creates a site window.<br />
7. Click the Connect button, and <strong>Flowlink</strong> starts<br />
communication with the Pulse Doppler instrument.<br />
Connection Settings<br />
Type - Select “Direct” when connecting to the instrument<br />
through an interrogator cable, communication cable, or short<br />
14
Change language