Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Direct Connections
- Pulse Doppler
Instruments
A Communications Cable, Isco P/N 60-7004-057, connects the
accQmin, ADFM box, or canister with amphenol connectors to
your PC’s com port. To connect the ADFM canister with crown
connector, use Cable P/N 60-7004-027.
Instrument
Connection
Diagram
Move an instrument
to a new site
You may need to periodically move an instrument to a new
location. Flowlink will continue to connect to the instrument as it
did in its original location, but you will probably want to create a
new site in the workspace and clear the old readings stored in the
instrument’s memory.
To create a new site after relocating an instrument:
1. Click the Quick Connect button on the toolbar, or
press F11.
2. Check the “Create new site” check box on the Quick
Connect window.
3. Click the large Connect button that matches the
instrument type.
4. Flowlink connects to the instrument and asks you to
enter a new name for the site. Click Ok.
5. Flowlink opens the Save As window. Type in the new site
name and click the OK button. Flowlink continues to
connect to the instrument.
6. After Flowlink reads the instrument settings, it will
pause and ask if you would like to clear the memory
partitions (4100/4200/6700), or delete all of the data in
the modules (2100). Select “Yes” to clear all of the data. If
you select “No,” the instrument will retain the data
collected at its original location. Flowlink then completes
the connection process.
150