Flowlink 5.1 Software Instruction Manual - Isco

More documents

Recommendations

Info

Isco Flowlink 5.1 ® Software Make a direct connection Direct connections - 4100/4200/6700 Direct connections use a cable to attach your PC to the Isco instrument. • 4100, 4200, and 6700 Series instruments use an Interrogator Cable for direct connections. The interrogator cable is also compatible with the 675 and 676 Logging Rain Gauge. • 2100 Series instruments including the Field Wizard use a Communications Cable for direct connections. • Pulse Doppler Series instruments use a Communications Cable for direct connections. When the interrogator port is easily accessible, you may use the 10-foot long one-piece interrogator cable. Unrestricted access to the interrogator port allows you to connect to the instrument as needed, and to disconnect and cap the port when you are through. • Part Number 60-2544-044 - for computers with a 9-pin connector • Part Number 60-2544-040 - for computers with a 25-pin connector • Part Number 60-2004-507 - for computers with a USB connector If the instrument’s location is inaccessible, use the two-piece interrogator cable. It is a set of two cables, one 10 feet long and one 3 feet long. The 10-foot cable connects to the instrument, while the 3-foot cable connects to your PC. These two cables are connected to communicate with the instrument. When you are done, disconnect the two cables from each other. Because the 10- foot section should remain connected to the instrument, a 10-foot cable is needed for each inaccessible instrument. • Part Number 60-2544-025 - 10-foot cable, connects to the instrument • Part Number 60-2544-026 - 3-foot cable, connects to computer with a 9-pin connector • Part Number 60-2544-027 - 3-foot cable, connects to computer with a 25-pin connector • Part Number 60-2544-028 - 25-foot extension cable Note: 4100 Series Flow Loggers and 4200 Series Flow Meters - If you are connecting a battery-powered flow logger, the interrogator cable must be disconnected when not in use. Otherwise, the flow logger will drain its battery unnecessarily. One-piece cables must be completely removed from the flow logger, and the interrogator port should be capped to prevent damage. If you are using a two-piece cable, they must be separated. 148
Isco Flowlink 5.1 ® Software Instrument connection diagram Direct connections - 2100 and Field Wizard A USB RS-232 Communications Cable, Isco P/N 60-2004-507, connects the 2100 Series instrument to your PC’s USB port. An RS-232 Communications Cable, Isco P/N 60-2004-046, connects the 2100 Series instrument to your PC’s Com port. Refer to the diagram below. Instrument Connection Diagram The 2101 Field Wizard does not have a case top connector. Instead, the communications cable attaches to the connector on the right side of the case. Extension and custom-length cables are available from Teledyne Isco. 149
Page 1:
Flowlink ® 5.1 Software Instructio
Page 4 and 5:
Isco Flowlink 5 ® Software Table o
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Isco Flowlink 5.1 ® Software Welco
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Isco Flowlink 5.1 ® Software Getti
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Isco Flowlink 5.1 ® Software Menu
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Isco Flowlink 5.1 ® Software Site
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109: Isco Flowlink 5.1 ® Software Site
Page 120 and 121: Isco Flowlink 5.1 ® Software Graph
Page 142 and 143: Isco Flowlink 5.1 ® Software Edito
Page 154 and 155: Isco Flowlink 5.1 ® Software Sched
Page 156 and 157: Isco Flowlink 5.1 ® Software Sched
Page 160 and 161: Isco Flowlink 5.1 ® Software Direc
Page 162 and 163: Isco Flowlink 5.1 ® Software graph
Page 164 and 165: Isco Flowlink 5.1 ® Software The e
Page 166 and 167: Isco Flowlink 5.1 ® Software • C
Page 168 and 169: Isco Flowlink 5.1 ® Software • P
Page 170 and 171: Isco Flowlink 5.1 ® Software 160
Page 172 and 173: Isco Flowlink 5 ® Software Index S
Page 174 and 175: Isco Flowlink 5 ® Software Index Q
Page 176: Isco Flowlink 5 ® Software Index I
show all

Flowlink 5.1 Software Instruction Manual - Isco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?