Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Flowlink 5.1 Software Instruction Manual - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Isco</strong> <strong>Flowlink</strong> <strong>5.1</strong> ® <strong>Software</strong><br />
Editor Window<br />
251 Gap Record Used by DATAMAN, a <strong>Flowlink</strong> 2<br />
module, to indicate a gap in time<br />
between two merged data sets. This<br />
value appears only in readings<br />
imported from an edited <strong>Flowlink</strong> 2<br />
data set.<br />
250 Data Overflow The number of rainfall counts<br />
produced by the rain gauge<br />
exceeded the capacity of the<br />
memory location.<br />
248 Low Signal Strength Area velocity instruments use this<br />
No Data Code to indicate the flow<br />
stream does not contain enough<br />
reflective particles for the sensor to<br />
produce a velocity reading or that<br />
the sensor is covered with silt or<br />
sludge.<br />
247 Velocity Level Too<br />
Low<br />
Area velocity instruments use this<br />
No Data Code to indicate that the<br />
water level in the flow stream is<br />
below the minimum depth and the<br />
“set flow rate to zero if no velocity<br />
data” option is selected.<br />
141