Flowlink 5.1 Software Instruction Manual - Isco

Isco Flowlink 5.1 ® Software
Graph Window
synchronized and repeats when the displayed time span is
changed.
Note: Reference curve data can be edited.
Annotating Graphs
Horizontal Lines
Vertical Lines
Text Boxes
Flowlink provides several tools to annotate graphs before
printing or exporting. You can add horizontal and vertical lines,
and text to the graphs.
Flowlink can add Best Fit Curves to a scatter plot.
Two horizontal lines can be added to each pane in a graph to
temporarily annotate data for display and printing. To add
horizontal lines:
1. In an open graph, select a data point in the pane to which
the line should be added.
2. Right-click on the graph and select the Horizontal Line
option. This opens a window to specify where the lines
will be added.
3. Check the 1st Value check box, then enter the Y-axis
value that the horizontal line will intersect.
4. If a second line is desired, check the 2nd Value box and
specify the Y-axis value.
5. Click OK.
Repeat for other panes as needed.
Note: Horizontal lines are active as long as the graph is open.
The lines will display for all viewed time spans. However,
horizontal lines are not saved with the Graph (.IGD) file.
A vertical line can be added to a graph to temporarily annotate
data for display and printing. The vertical line extends through
all panes in the graph. To add a vertical line:
1. In an open graph, select a data point in the pane to which
the line should be added.
2. Right-click and select the Vertical Line option. A vertical
line appears at the selected point in the time span.
This option toggles the vertical line on and off. As long as this
option is on, the vertical line appears at the selected data point in
a graph. Therefore, the line can be moved by clicking on a new
point in the graph, or by moving the selected point using the left
and right arrow keys. If the time span is changed, the selected
point is the first (left-most) point in the first pane of the graph.
Text can be added to graphs to annotate data. To add text:
1. Select a data point on a graph.
2. Right-click and select TextBox from the menu. The Add
Text Box window opens.
3. Type the text.
The text box allows up to 40 characters.
126