naval dockyard, mumbai - Irfc-nausena.nic.in
naval dockyard, mumbai - Irfc-nausena.nic.in
naval dockyard, mumbai - Irfc-nausena.nic.in
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E20009 Both rudder stock bush clearances to be checked.<br />
On completion renew gland pack<strong>in</strong>g as per sample<br />
(MatGreased Hemp/cotton grease, complete 05<br />
turn, rudder stock dia 110 mm).<br />
E20010 If clearances found beyond permissible limits,<br />
withdraw rudder stocks and renew bushes,<br />
sleeves, repair rudder journals and restore to<br />
design clearances. Details of bushes and sleeves<br />
as below.<br />
(i) Bushes: Mat GM BS 1400, LG 3C;<br />
Length 260 mm; ID 122 mm; OD 152<br />
mm<br />
ii) Sleeves: Mat Phosphor Bronze BS 1400PB<br />
1C; Thickness 6 mm; ID 110 mm, Length480<br />
mm; shrunk fitted;<br />
E20011 Steer<strong>in</strong>g hydraulic motor driven pump(Type M 4)<br />
to be overhauled and gears, shafts, bear<strong>in</strong>g seals,<br />
02 <strong>in</strong> nos electrically operated maneuver<strong>in</strong>g valves<br />
to be renewed (Type S 35 P, 24 V DC, make<br />
Tenfjord). (Work<strong>in</strong>g pressure 40 Kg/cm2, test<strong>in</strong>g<br />
pressure 60kg/cm2).Prove pumps post<br />
overhaul<strong>in</strong>g. ).<br />
E20012 Overhaul and repair steer<strong>in</strong>g hand operated wheel<br />
pump (Type H 33) and transmitter, renew worn out<br />
parts as per MQC <strong>in</strong>spection. Prove the pump for<br />
satisfactory operation.<br />
E20013 02 <strong>in</strong> nos gear box lub oil coolers to be removed,<br />
chemically cleaned, pressure tested & fitted back<br />
on completion. Defective tubes to be blanked Qty<br />
02, Test Pressure 10 Kg/ cm2. ).<br />
02 Nos<br />
02 Nos<br />
01 Nos<br />
01 Nos<br />
02 Nos<br />
DYT/INCOD/1213/106(a)/PLYCM/MADHURREFIT/420 38/127