ekS - Instytut Agrofizyki im. Bohdana Dobrzańskiego PAN w Lublinie ...

time the Real Time Clock module wakes-up the device, the Script Execution
Interpreter reads the following commands, interprets them and executes sending
commands to the work interface RS232C or RS485, setting the TTL outputs,
reading the sensor data or storing the data into the MMC memory.
Fig. 54.
Simplified functional diagram of the MIDL setup in SLAVE configuration
The access to data and to all configuration parameters of the device inscribed
in the MMC memory card is possible by the 433 MHz radio link, RS232C serial
and 10BaseT-Ethernet interfaces. All of them operates using IP protocol and the
configuration of the device and the data access is the same for each interface.
The 433 MHz radio link enables a remote access to each SLAVE from the
MASTER device. The operator activated the remaining interfaces directly at the
device (ex by means of a notebook) after pushing the dedicated switch.
The characteristic features of the SLAVE device:
− cyclic execution of commands from the script file to control
measurement from external probes,
− connection with the measuring probes by means of RS232C or RS485
interfaces,
113