WF160WA01 specifications.indd - Intertechnik
WF160WA01 specifications.indd - Intertechnik
WF160WA01 specifications.indd - Intertechnik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SPECIFICATIONS<br />
<strong>WF160WA01</strong> 6¼” neodymium mid/woofer<br />
OUTLINE DRAWING (dimensions in mm)<br />
160<br />
max 70<br />
3.20<br />
R117.5<br />
max 143<br />
EVA gasket attached to<br />
rear side of chassis<br />
4 x<br />
4.5<br />
160<br />
177.6<br />
CROSS SECTION<br />
1. Black anodized flux return path<br />
2. Primary neodymium magnet<br />
3. Black anodized heat sink<br />
4. 1¼” voice coil<br />
5. Black anodized pole plate<br />
6. Black anodized top plate<br />
7. Secondary neodymium magnet<br />
8. Black glass fiber bobbin<br />
9. Ventilated chassis<br />
10. Linear lower suspension (spider), Conex<br />
11. Paper dust cover<br />
12. Optimized paper cone<br />
13. Linear low-loss rubber suspension<br />
PACKAGING INFORMATION<br />
<strong>WF160WA01</strong>-01<br />
<strong>WF160WA01</strong>-02<br />
One piece per box<br />
Bulk packaging<br />
Specifications are subject to change without any further notice. Copyright © 2006-2007 by Wavecor Ltd., Guangzhou, China. All rights reserved.<br />
Wavecor ® is a registered trademark of Wavecor Ltd.<br />
For more information please visit www.Wavecor.com<br />
Page 2