Cryogel Z MSDS 2012 - Insulation Industries

More documents

Recommendations

Info

Product Name CRYOGEL Z 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Supplier Name AEROGELS AUSTRALIA PTY. LTD. Address 174 Fullarton Road, Dulwich, SA, AUSTRALIA, 5065 Telephone +61 (0) 8 8363 7563 Emergency +61 (0) 8 8363 7563 Email OHS@aerogel.com.au Synonym(s) SILICA AEROGEL MATERIAL Use(s) INSULATING COMPOUND SDS Date 01 August <strong>2012</strong> 2. HAZARDS IDENTIFICATION NOT CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA RISK PHRASES None allocated SAFETY PHRASES None allocated NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE UN Number Packing Group Hazchem Code None Allocated None Allocated None Allocated DG Class Subsidiary Risk(s) None Allocated None Allocated 3. COMPOSITION/ INFORMATION ON INGREDIENTS Ingredient Identification Classification Content ALUMINIUM CAS: 7429-90-5 F+;R15 F;R17
Product Name CRYOGEL Z Advice to Doctor Due to product form and application, ingestion is considered unlikely. Treat symptomatically. 5. FIRE FIGHTING MEASURES Flammability Fire and Explosion Extinguishing Hazchem Code Non flammable. May evolve toxic gases (carbon oxides) when heated to decomposition. No fire or explosion hazard exists. Prevent contamination of drains or waterways. None Allocated 6. ACCIDENTAL RELEASE MEASURES Spillage If spilt/ packages damaged, collect for later disposal or reuse. For large spills, use personal protective equipment. Contain spillage, then cover / absorb spill with non-combustible absorbent material (vermiculite, sand, or similar), collect and place in suitable containers for disposal. Avoid generating dust. 7. STORAGE AND HANDLING Storage Handling Store in a cool, dry, well ventilated area, removed from acids and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Standards Ingredient Reference TWA STEL ppm mg/m³ ppm mg/m³ Aluminium (metal dust) SWA (AUS) -- 10 -- -- Aluminium (welding fumes) (as Al) SWA (AUS) -- 5 -- -- Aluminium, alkyls (NOC+) (as Al) SWA (AUS) -- 2 -- -- Aluminium, pyro powders (as Al) SWA (AUS) -- 5 -- -- Aluminium, soluble salts (as Al) SWA (AUS) -- 2 -- -- Non-respirable fibres, inspirable dust SWA (AUS) -- 2 -- -- Synthetic mineral fibres (SMF) SWA (AUS) -- 0.5 f/ml -- -- Biological Limits Engineering Controls No biological limit allocated. Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is recommended. Maintain dust levels below the recommended exposure standard. PPE Eye / Face Hands Body Respiratory Wear dust-proof goggles. Wear latex or nitrile gloves. Wear coveralls. Where an inhalation risk exists, wear a Class P1 (Particulate) respirator. Page 2 of 5 SDS Date: 01 Aug <strong>2012</strong>
Page 1: superinsulation Safety Data Sheet S
Page 5 and 6: Product Name CRYOGEL Z 14. TRANSPOR

Cryogel Z MSDS 2012 - Insulation Industries

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?