Minilyzer ML1 User Manual
Minilyzer ML1 User Manual
Minilyzer ML1 User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting<br />
5. TroublesHooTING<br />
System Break Down<br />
• Switch the device off.<br />
• Reset the <strong>ML1</strong> to the default status by pressing the ESC button<br />
and switching the <strong>Minilyzer</strong> on simultaneously.<br />
• Release the ESC button.<br />
• The below screenshot, Fig 26, shall appear on the display, stating<br />
on the bottom line LOADING DEFAULT SETUP.<br />
• Verify the correct operation.<br />
Fig 5.1 Start Up Screen Loading Default Setup<br />
In case you find system breakdowns happening several times or your<br />
device is malfunctioning please contact the local NTi Audio representative<br />
in your country. For contact-details please see the NTi Audio web<br />
page: "www.nti-audio.com".<br />
Low Level Measurements<br />
The <strong>Minilyzer</strong> does automatically<br />
recognize the actual input (XLR<br />
or RCA) in use. To measure low<br />
level audio signals (< 70 dBu)<br />
the balanced input shall be used<br />
only. Unbalanced signals need<br />
to be connected to the XLRinput<br />
via an XLR/RCA-adapter.<br />
46<br />
1<br />
2<br />
3<br />
Fig 5.2 XLR/RCA Adapter<br />
Hot
Change language