Minilyzer ML1 User Manual
Minilyzer ML1 User Manual
Minilyzer ML1 User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
enter / Cursor Control<br />
The cursor is the core control element of <strong>ML1</strong>, providing access to<br />
its menus and to the current instrument settings. The cursor position<br />
is represented by an inverted display (white on black) of the field<br />
holding the cursor.<br />
The cursor may be moved from menu to menu by using the four gray<br />
arrow keys , , and . The enter key (↵) has to be pressed to<br />
enter a submenu or to confirm the current selection.<br />
To modify the menu status execute the following procedure:<br />
• Move the cursor to the field of interest and press the enter key.<br />
• Scroll to the required menu option by using the arrow keys.<br />
• Confirm your selection by pressing the enter key.<br />
Please note that in certain selection modes, the measurement result<br />
will be updated with the new selection even before the enter key has<br />
been pressed for confirmation.<br />
For instance, if a new level unit is selected - but not yet confirmed - the<br />
display will instantly update to the newly selected unit even before the<br />
enter key has been pressed for confirmation.<br />
In case of an unwanted change of any menu, the old status may be<br />
re-established by pressing the ESC-key.<br />
display Mode<br />
Basic Operation<br />
Giving a better readability the display mode determines the rapidity of<br />
following up input signal changes. The available modes are:<br />
• SLOW 3 sec. averaging<br />
• NRM 1 sec. averaging<br />
• FAST no averaging<br />
If averaging is active, measurements are smoothed in an exponential<br />
way (exponential time constant) before being displayed.<br />
12