User manual - JG Technologies

Waypoint features
There are a range of features for placing, navigating and managing
waypoints.
Waypoint features are accessed from:
• the waypoint context menu — by positioning the cursor over an
existing waypoint on the screen.
• any application — by pressing the WPT button. This displays
the Waypoints menu.
• the chart application — by going to the following menu: Menu
> My Data.
• the homescreen — by going to the following menu: My Data.
Note: Pressing the WPT button from the homescreen will open
the waypoint list.
Waypoint placement
Placing a waypoint using touch
4. Enter the Latitude/Longitude position.
5. Select SAVE.
6. You can also add a name for the waypoint and add to a group
by selecting the Name and Group fields.
Navigation
Navigating to the cursor position on the chart using touch
This only applies to HybridTouch displays.
From the chart application:
1. Select and hold on the required location on screen.
The chart context menu is displayed.
2. Select Goto Cursor.
Navigating to the cursor position on the chart
This only applies to HybridTouch displays.
D11764-2
From the chart, radar or fishfinder application:
1. Select and hold the required location on screen.
The context menu is displayed.
2. Select Place Waypoint.
D11763-2
Placing a waypoint at the cursor position
From the chart, radar or fishfinder application:
1. Using the joystick move the cursor to the area of the screen
where you want the waypoint to be placed.
2. Press the WPT button.
The waypoint menu is displayed.
3. Select Place Waypoint at Cursor.
The waypoint is placed at the location and a confirmation pop up
message is displayed.
4. Select Ok to confirm waypoint placement, or Edit to edit the
waypoint details.
Placing a waypoint at your vessel’s position
In addition to positional information, a waypoint placed at the vessel
position will capture temperature and sounded depth information (if
you have the appropriate sensors connected to your system).
From the chart, radar or fishfinder application:
1. Press the WPT button.
The waypoint menu is displayed.
2. Press the WPT button again.
A confirmation pop up message is displayed.
3. Select Ok to place the waypoint, or Edit to edit the waypoint
details.
Note: Alternatively with the waypoint menu displayed you can
select Place Waypoint At Vessel.
Placing a waypoint at a known position
You can place a waypoint at a specified location using latitude and
longitude coordinates:
1. Press the WPT button.
2. Select Place Waypoint At Lat/Lon.
3. Select the position field.
From the chart application:
1. Position the cursor at the desired destination on the chart.
2. Select Menu.
3. Select Navigate.
4. Select Goto Cursor.
Navigating to a waypoint on the screen
From the chart or radar application:
1. Select the waypoint.
The waypoint context menu is displayed.
2. Select the Goto Waypoint.
Note: With an active waypoint selected you can select Stop
Goto option from the waypoint context menu at any time to
cancel the action.
Navigating to a waypoint in the waypoints list
From any application:
1. Press the WPT button.
The waypoint menu is displayed.
2. Select View Waypoint List.
The waypoints list is displayed.
3. Select the required waypoint.
The waypoint options dialog is displayed.
4. Select Goto Waypoint.
D11753-2
Note: Pressing the WPT button from the homescreen will display
the waypoints list.
Cancelling navigation to a waypoint
From the chart or radar application:
Using waypoints, routes and tracks 85