User manual - JG Technologies

7.5 Resetting your system
Your system may be reset to its factory default settings if required.
There are 2 types of reset operation, both of which affect the current
display you are using, AND any networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and databar
settings to factory default. It will NOT affect your waypoints, routes,
or tracks data.
Settings and data reset
In addition to the settings reset detailed above, performing a settings
and data reset will also remove ALL waypoints, routes, and tracks
data.
Resetting system settings
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings reset, or No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases ALL
waypoints, routes, and track data from your system. BEFORE
proceeding with a settings and data reset, ensure that you backup
any data that you want to keep on to a memory card.
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings and Data Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings and data reset, or No
to cancel.
Managing display data 81