User manual - JG Technologies

Using control dialogs
Control dialogs enable you to control externally connected
equipment, such as an autopilot unit.
The following diagram shows the main features of a typical control
dialog:
6.15 Editing information in dialogs
With the dialog displayed:
1. Select the field you want to edit.
The on-screen keyboard is displayed:
1
2
3
D12279-1
Screen item
Description
1 Status — provides status information for the connected
equipment. For example, the Pilot Control dialog displays
the locked heading and current navigation mode for a
connected autopilot unit.
2 Control icons — provide direct control of the connected
equipment. For example, the Pilot Control dialog Standby,
Auto and Track icons enable you to instruct a connected
autopilot unit to perform specific functions.
3 Dismiss — Closes the control dialog.
2. Use the on-screen keyboard to make the changes.
3. Use the on-screen keyboard’s SAVE key to keep any changes.
Entering special or accented characters
With the on-screen keyboard displayed:
1. Select the on-screen keyboard’s àèò key.
2. Select the character you want to accent.
The available accented characters are displayed above the text
entry field.
3. For characters that have multiple available accents, use the
character key to toggle between them.
4. Select the àèò key to enter the character.
70 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127