User manual - JG Technologies

In some circumstances it may be better to use just the UniControl’s
rotary and joystick controls to manipulate the thermal camera view.
For example, this method is ideal for finer control over the camera
and is particularly useful in rough sea conditions.
UniControl joystick — is used for rotating the camera left or
right (panning), or tilting the camera up or down.
UniControl rotary — is used to zoom in and out.
6.9 Enabling autopilot functions
With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Autopilot Control.
4. Select the On or Off option as appropriate.
5. Use the Back button to return to the System Settings menu.
6. Select Pilot Controls.
If this menu option is disabled, no autopilot has been found.
Check the physical connections, then repeat steps 1 to 6.
7. The Pilot Control dialog is displayed, indicating that pilot control
is enabled and an autopilot is detected.
Resetting the thermal camera to the home position
In the thermal camera application:
1. Select Menu.
2. Select Camera Home.
The camera returns to its currently defined home position, and
the “Home” icon appears on-screen momentarily.
Getting started 65