User manual - JG Technologies

More documents

Recommendations

Info

Example: Expanded system 1 2 3 4 5 6 7 8 9 SeaTalk ng SeaTalk ng SeaTalk ng SeaTalk hs / RayNet SeaTalk ng 10 15 DeviceNet 11 12 12 13 14 SeaTalk hs / RayNet SeaTalk hs / RayNet SeaTalk hs / RayNet D12247-1 1. Digital radome scanner. 2. Weather sensor. 3. Sirius weather receiver. 4. Digital Sounder Module (DSM). 5. Pilot controller. 6. Instrument. 7. AIS receiver / transceiver. 8. Audio system. 9. Smartphone. 10. DeviceNet spur (for NMEA 2000 devices). 11. Raymarine network switch. 12. Multifunction display. 13. GPS receiver. 14. Thermal camera. 15. Wireless connection. 26 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127
3.8 System protocols Your Multifunction Display can connect to various instruments and displays to share information and so improve the functionality of the system. These connections may be made using a number of different protocols. Fast and accurate data collection and transfer is achieved by using a combination of the following data protocols: • SeaTalk hs • SeaTalk ng • NMEA 2000 • SeaTalk • NMEA 0183 Note: You may find that your system does not use all of the connection types or instrumentation described in this section. SeaTalk hs SeaTalk hs is an ethernet based marine network. This high speed protocol allows compatible equipment to communicate rapidly and share large amounts of data. Information shared using the SeaTalk hs network includes: • Shared cartography (between compatible displays). • Digital radar data. • Sonar data. e.g. a compass sensor transmitting heading to a radar display. This information is passed in ‘sentences’, each of which has a three letter sentence identifier. It is therefore important when checking compatibility between items that the same sentence identifiers are used some examples of which are: • VTG - carries Course and Speed Over Ground data. • GLL - carries latitude and longitude. • DBT - carries water depth. • MWV - carries relative wind angle and wind speed data. NMEA baud rates The NMEA 0183 standard operates at a number of different speeds, depending upon the particular requirement or equipment capabilities. Typical examples are: • 4800 baud rate. Used for general purpose communications, including FastHeading data. • 9600 baud rate. Used for Navtex. • 38400 baud rate. Used for AIS and other high speed applications. Seatalk ng SeaTalk ng (Next Generation) is an enhanced protocol for connection of compatible marine instruments and equipment. It replaces the older SeaTalk and SeaTalk 2 protocols. SeaTalk ng utilizes a single backbone to which compatible instruments connect using a spur. Data and power are carried within the backbone. Devices that have a low draw can be powered from the network, although high current equipment will need to have a separate power connection. SeaTalk ng is a proprietary extension to NMEA 2000 and the proven CAN bus technology. Compatible NMEA 2000 and SeaTalk / SeaTalk 2 devices can also be connected using the appropriate interfaces or adaptor cables as required. NMEA 2000 NMEA 2000 offers significant improvements over NMEA 0183, most notably in speed and connectivity. Up to 50 units can simultaneously transmit and receive on a single physical bus at any one time, with each node being physically addressable. The standard was specifically intended to allow for a whole network of marine electronics from any manufacturer to communicate on a common bus via standardized message types and formats. SeaTalk SeaTalk is a protocol which enables compatible instruments to connect to each other and share data. The SeaTalk cable system is used to connect compatible instruments and equipment. The cable carries power and data and enables connection without the need for a central processor. Additional instruments and functions can be added to a SeaTalk system, simply by plugging them into the network. SeaTalk equipment can also communicate with other non-SeaTalk equipment via the NMEA 0183 standard, provided a suitable interface is used. NMEA 0183 The NMEA 0183 Data Interface Standard was developed by the National Marine Electronics Association of America. It is an international standard to enable equipment from many different manufacturers to be connected together and share information. The NMEA 0183 standard carries similar information to SeaTalk. However it has the important difference that one cable will only carry information in one direction. For this reason NMEA 0183 is generally used to connect a data receiver and a transmitter together, Planning the installation 27
Page 1: e 7 / e 7 D / e 9 5 / e 9 7 / e 1 2
Page 5 and 6: Contents Chapter 1 Important inform
Page 7 and 8: 20.4 Camera setup .................
Page 9 and 10: Chapter 1: Important information Wa
Page 11 and 12: Industry Canada (Français) Cet app
Page 13 and 14: Chapter 2: Handbook information Cha
Page 15 and 16: 2.3 Handbook illustrations The illu
Page 17 and 18: Chapter 3: Planning the installatio
Page 19 and 20: Item Device Type Maximum quantity S
Page 21 and 22: Item Device Type Maximum quantity S
Page 23 and 24: 3.4 Multiple data sources (MDS) ove
Page 25: 3.7 Typical systems SMMART TPIL LOT
Page 29 and 30: 3.11 Parts supplied 3.12 Tools requ
Page 31 and 32: Chapter 4: Cables and connections C
Page 33 and 34: 4.3 Power connection Power cable Th
Page 35 and 36: 4.4 Network connections You can con
Page 37 and 38: Digital radar cable extension For l
Page 39 and 40: Sonar variant multifunction display
Page 41 and 42: 4.7 Fastheading connection If you w
Page 43 and 44: 4.9 SeaTalk connection You can conn
Page 45 and 46: Item Device Cable color Port Input
Page 47 and 48: 4.13 Video in-out connection A vide
Page 49 and 50: 4.15 WiFi connections Video streami
Page 51 and 52: Chapter 5: Location and mounting Ch
Page 53 and 54: Product dimensions C 5.2 Removing t
Page 55 and 56: 5.5 Bracket (trunnion) mounting The
Page 57 and 58: Chapter 6: Getting started Chapter
Page 59 and 60: 6.3 c95 / c97 / c125 / c127 / e95 /
Page 61 and 62: 6.5 Hybridtouch overview Your multi
Page 63 and 64: 2 5. Select Radar. 6. Select the Tr
Page 65 and 66: In some circumstances it may be bet
Page 67 and 68: 6.12 Pages Pages are used to displa
Page 69 and 70: Screen item Description 1 Back —
Page 71 and 72: 6.16 Editing Numerical values in di
Page 73 and 74: Symbol Description Power steering a
Page 75 and 76: Chapter 7: Managing display data Ch
Page 77 and 78:
7.3 Removing a memory card or chart
Page 79 and 80:
Application Setting Affected System
Page 81 and 82:
7.5 Resetting your system Your syst
Page 83 and 84:
Chapter 8: Using waypoints, routes
Page 85 and 86:
Waypoint features There are a range
Page 87 and 88:
Symbol Type Symbol Type Fish (1-sta
Page 89 and 90:
1. Select and hold a location on sc
Page 91 and 92:
1. Select Menu. 2. Select My Data.
Page 93 and 94:
• From the chart application, sel
Page 95 and 96:
Chapter 9: Using the chart Chapter
Page 97 and 98:
Navionics chartplotter sync connect
Page 99 and 100:
Auto Range selects and maintains th
Page 101 and 102:
9.4 Chart context menu Placing the
Page 103 and 104:
9.8 Chart vectors Chart vectors dis
Page 105 and 106:
9.10 Tide information Animated tide
Page 107 and 108:
9.12 Chart presentation The chart h
Page 109 and 110:
Enabling centre of view To enable t
Page 111 and 112:
Chart set-up menu options The follo
Page 113 and 114:
Menu item Description Options Nav.
Page 115 and 116:
Chapter 10: Using autopilot control
Page 117 and 118:
10.2 Autopilot status symbols The a
Page 119 and 120:
Chapter 11: Using alarms and MOB fu
Page 121 and 122:
11.2 Alarms Alarms alert you to a s
Page 123 and 124:
Menu item Description Options Guard
Page 125 and 126:
Chapter 12: Using radar Chapter con
Page 127 and 128:
12.2 Digital radar scan speed Super
Page 129 and 130:
Blind Sectors Obstructions such as
Page 131 and 132:
Scanner Dual Range mode Operating m
Page 133 and 134:
12.8 Radar adjustments: HD and Supe
Page 135 and 136:
12.9 Radar adjustments: non-HD digi
Page 137 and 138:
Function Description Options Data O
Page 139 and 140:
D12214-1 D12215-1 D12216-1 VRM/EBL
Page 141 and 142:
1. Select the guard zone. The guard
Page 143 and 144:
2. Press the Ok button The MARPA co
Page 145 and 146:
12.14 Resetting the radar To reset
Page 147 and 148:
Chapter 13: Using AIS Chapter conte
Page 149 and 150:
13.2 AIS prerequisites You must hav
Page 151 and 152:
13.6 AIS status symbols AIS status
Page 153 and 154:
13.10 Viewing all AIS targets From
Page 155 and 156:
13.13 AIS alarms The AIS functions
Page 157 and 158:
Chapter 14: Using the fishfinder Ch
Page 159 and 160:
14.2 The sonar image Interpreting t
Page 161 and 162:
14.5 Fishfinder preset configuratio
Page 163 and 164:
14.7 Fishfinder range The Range and
Page 165 and 166:
6. Press the Ok button, or select t
Page 167 and 168:
14.11 Fishfinder scrolling The fish
Page 169 and 170:
14.14 Sounder set-up menu options T
Page 171 and 172:
14.16 Resetting the sonar The reset
Page 173 and 174:
Chapter 15: Using the data applicat
Page 175 and 176:
Datapage Default Data Items Engine
Page 177 and 178:
Data Category Data Item Digital Dia
Page 179 and 180:
Chapter 16: Using the weather appli
Page 181 and 182:
16.3 Weather application display ov
Page 183 and 184:
Color code Precipitation type Refle
Page 185 and 186:
16.6 Weather information You can vi
Page 187 and 188:
16.9 Weather application menu optio
Page 189 and 190:
Term Wave cyclone Wave period Defin
Page 191 and 192:
Chapter 17: Using video Chapter con
Page 193 and 194:
Chapter 18: Wireless video streamin
Page 195 and 196:
18.3 Enabling display streaming Dis
Page 197 and 198:
Chapter 19: Media player applicatio
Page 199 and 200:
19.3 Pairing a Bluetooth media play
Page 201 and 202:
19.7 Unpairing a Bluetooth device I
Page 203 and 204:
Chapter 20: Using the thermal camer
Page 205 and 206:
20.2 Camera control Thermal camera
Page 207 and 208:
Enabling thermal camera rear view m
Page 209 and 210:
Chapter 21: DSC VHF radio integrati
Page 211 and 212:
Chapter 22: Using a remote control
Page 213 and 214:
22.3 Operating principles Remote co
Page 215 and 216:
22.6 Reconnecting the RCU 1. When y
Page 217 and 218:
Chapter 23: Customizing your displa
Page 219 and 220:
23.2 Boat details You can customize
Page 221 and 222:
23.4 Time and Date set-up You can s
Page 223 and 224:
23.6 Data cell and databar customiz
Page 225 and 226:
Data category Description Options E
Page 227 and 228:
Alarms menu Menu item Description O
Page 229 and 230:
Ground trip resets menu This menu e
Page 231 and 232:
Menu item Description Options Conne
Page 233 and 234:
Menu item Description Options Note:
Page 235 and 236:
Chapter 24: Maintaining your displa
Page 237 and 238:
24.3 Cleaning Best cleaning practic
Page 239 and 240:
Chapter 25: Troubleshooting Chapter
Page 241 and 242:
25.2 Power up troubleshooting Probl
Page 243 and 244:
25.4 GPS troubleshooting Problems w
Page 245 and 246:
25.6 Thermal camera troubleshooting
Page 247 and 248:
25.8 Video troubleshooting Problems
Page 249 and 250:
25.10 Bluetooth troubleshooting Asp
Page 251 and 252:
25.12 Miscellaneous troubleshooting
Page 253 and 254:
Chapter 26: Technical support Chapt
Page 255 and 256:
Chapter 27: Technical specification
Page 257 and 258:
Resolution Viewing angle 800 x 480
Page 259 and 260:
Chapter 28: Spares and accessories
Page 261 and 262:
28.3 e7 e7D spares Item Part number
Page 263 and 264:
28.7 e125 / e127 / c125 / c127 spar
Page 265 and 266:
Appendix A NMEA 0183 sentences The
Page 267 and 268:
Appendix C Connectors and pinouts P
Page 270:
www.raymarine.com
show all

User manual - JG Technologies

Create successful ePaper yourself

Delete template?

Save as template?