User manual - JG Technologies
User manual - JG Technologies
User manual - JG Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Data sources menu<br />
This menu enables you to select the external sensors and devices that will provide data to the display.<br />
Auto / <strong>manual</strong> selection<br />
Each dialog enables you to view and select your preferred data<br />
source. selection of data source can be <strong>manual</strong> or set to automatic:<br />
• Auto — the display will automatically select a device and attempt<br />
to resolve any data conflicts that may occur where there is more<br />
than one source of data for that particular data source (for<br />
example, multiple GPS receivers).<br />
• Manual — once the display has performed a search for connected<br />
devices you can <strong>manual</strong>ly select the preferred device from the list.<br />
Note: Selecting the Auto option may result in the system<br />
choosing a source of data that you do not want to use.<br />
Device selection<br />
Menu item<br />
GPS<br />
GPS Datum<br />
Time and Date<br />
Heading<br />
Depth<br />
Speed<br />
Wind<br />
Description<br />
Enables you to search for any externally-connected GPS devices, and select the one you want<br />
to use.<br />
In order for your GPS receiver and multifunction display to correlate accurately with your paper<br />
charts, they must be using the same datum. This option enables you to choose the data source<br />
for this datum.<br />
Enables you to select the device you want to use for the time and date information used by the<br />
display.<br />
Enables you to select the device you want to use for heading data.<br />
Enables you to select the device you want to use for depth data.<br />
Enables you to select the device you want to use for speed data.<br />
Enables you to select the device you want to use for wind data.<br />
External devices menu<br />
This menu enables you to configure the external devices connected to the display.<br />
Menu item Description Notes<br />
Fishfinder Set-up<br />
Radar Set-up<br />
AIS Unit Set-up<br />
Remote Control<br />
Transducers Set-up<br />
Connections menu<br />
Enables you to select an external transducer and<br />
configure the options for the unit, such as depth<br />
offset. Also enables you to configure the options for<br />
an internal or external DSM Digital Sounder Module.<br />
Enables you to make radar scanner adjustments,<br />
such as tune adjust and time transmit.<br />
Enables you to configure additional functions for<br />
AIS units, such as Silent Mode. This menu item is<br />
only available when an AIS unit is detected or when<br />
Simulator mode is On.<br />
Enables you to customize certain controls for<br />
Raymarine Bluetooth remote control units (for<br />
example, RCU-3).<br />
Displays a list of connected transducers which you<br />
can select and calibrate.<br />
This menu enables you to connect wireless Bluetooth and WiFi devices to the display.<br />
Menu item Description Options<br />
Bluetooth Enable or disable Bluetooth on the display. • On<br />
WiFi Enable or disable WiFi on the display. • On<br />
For an explanation of these options refer to the<br />
Transducer set-up menu options described in the<br />
Fishfinder section of this document.<br />
For an explanation of these options refer to the<br />
Scanner set-up menu options described in the Radar<br />
section of this document.<br />
For an explanation of these options refer to the AIS<br />
menu options described in the AIS section of this<br />
document.<br />
For an explanation of these options refer to the<br />
Remote Control section of this document.<br />
• Off (default)<br />
• Off (default)<br />
230 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127