User manual - JG Technologies

19.3 Pairing a Bluetooth media player
With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Connections.
4. Select New Bluetooth Connection.
A message is displayed prompting you to put your media player
device into discovery mode.
5. Ensure Bluetooth is enabled on your external media player
device and ensure it is ready to be paired. For more information,
consult the instructions that accompany the device.
6. On the multifunction display, select OK in the message dialog.
The multifunction display will search for active Bluetooth devices.
7. Select Stop when your device appears in the list.
8. Select the media player device in the list.
A pairing request message is displayed on the external media
device.
9. On the external media device, select Pair (or equivalent) to
accept the pairing request message.
The multifunction display shows a message asking you to
confirm the Pairing code.
10.If the pairing code displayed on the multifunction display matches
the code displayed on the external media device, select Ok on
the multifunction display. If the code does NOT match, repeat
steps 4 to 8.
11. If the pairing was successful the multifunction display will confirm
the pairing.
The external media device is now paired with the multifunction
display.
19.4 Enabling audio control
With the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Connections.
4. Select Connection Manager.
5. Select the media player device in the list.
6. Select Audio Control > ON.
Media player application 199