User manual - JG Technologies

Example
1 2
1 Auto*
2 10,000 RPM
Note: *The maximum RPM when in auto mode is set by the
engine.
Changing color theme and dial colors
You can change both the color theme and the dial color.
From the data application:
1. Select Menu.
2. Select Presentation.
3. Select Color Theme.
Selecting color theme will switch color between Light and Dark.
4. Select Dial Color.
Selecting dial color will switch the color between Light and Dark.
Datapage and dial colors
Datapage color theme and dial colors can be switched between
light and dark.
Color Theme Dial Color Example
Light
Light
Light
Dark
Dark
Dark
Dark
Light
Resetting all datapages
You can reset the datapages in the data application to the factory
defaults.
1. Select Menu.
2. Select Reset All Pages.
The confirm reset pop up message is displayed.
3. Select Yes to reset or No to cancel the action.
Note: Resetting all pages will restore your pre-configured pages
to default settings and remove any custom pages that have been
created. Number of engines and maximum RPM settings will not
be changed during the reset.
178 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127