User manual - JG Technologies

10.2 Autopilot status symbols
The autopilot status is indicated in the databar.
Symbol
Description
Autopilot is in Standby mode.
Autopilot is in Track mode.
Autopilot is in Auto mode.
No autopilot detected.
Autopilot alarm active.
Dodge mode is active.
Fish mode is active.
Autopilot calibration.
10.3 Autopilot alarms
The autopilot function provides alarms to alert you to situations that
require action.
Your multifunction display shows autopilot alarms, regardless of
whether there is active navigation on the system. If autopilot control
is enabled, and an alarm is raised by the autopilot, the multifunction
display provides an audible alarm sound (providing that the alarm
has not already been silenced). The Pilot Control dialog is
displayed, indicating a new alarm. Additionally, the autopilot status
icon is displayed in red, and remains red until the alarm is cleared.
Silencing autopilot alarms
1. Select Dismiss.
The alarm is silenced and the autopilot remains engaged in auto
mode, continuing on the current locked heading.
2. Select Auto.
The alarm is silenced and the autopilot remains engaged in auto
mode, continuing on the current locked heading.
3. Select Track.
The alarm is silenced and the autopilot ’tracks’ to the next
waypoint.
Silencing autopilot alarms and disengaging
autopilot
1. Select STANDBY.
The alarm is silenced, and the autopilot is disengaged and put in
standby mode.
Power steering active.
Wind Vane mode is active.
Using autopilot control 117