WSM Reference Guide - WatchGuard Technologies

Event Logs
Event Log Message Catalog
Log Module Log Message ID Message
IKE 3 Certificate chain forming failure because the size is too large
IKE 4 Certificate chain forming failure: %s
IKE 5 Certificate validation failure: %s
IKE 6 Certificate validation failed because the Firebox cannot retrieve the public
key
IKE 7 Cannot validate peer ID in certificate (idType %d)
IKE 8 Cannot retrieve private key in certificate (id %d)
IKE 1000 IKE full policy loading complete
IKE 1002 IKE ready to have trace level %d and event level %d
IKE 1003 IKE is set to use LDAP server (%s)
IKE 1005 IKE daemon is starting
IKE 1006 IKE daemon stopped
IKE 1007 IKE uses software crypto
IKE 1008 IKE uses hardware crypto card for the public key cipher
IKE 1600 Try primary RADIUS server %s
IKE 1601 Backup RADIUS server (%s) is not responding
IKE 1602 Backup RADIUS server (%s) is not responding. Switch to primary server %s
IKE 1603 Primary RADIUS server (%s) is not responding
IKE 1604 Primary RADIUS server (%s) is not responding. Switch to backup RADIUS
server %s.
IKE 1605 Primary RADIUS server (%s) is not responding. No backup RADIUS server
configured.
IKE 9007 IKE is terminated by SIGBUS (%d). System may be out of memory.
IKE 9011 IKE is terminated by SIGSEGV (%d). System may become unstable.
MA 1000 received SIGTERM, MA daemon is shutting down
MIA 100 eth%d is up.
MIA 101 eth%d is down
MIA 201 The number of allowed IPSec tunnels %d is at 90% of its limit
MIA 202 The current number of IPSec tunnels %d is at its limit.
MIA 203 The number of %s exceeds its high water mark %lu.
MIA 204 The number of %s is at its limit %lu.
MIA 301 Deleted tunnel to peer %s.
MIA 302 The system’s cooling fan failed.
MIA 303 The system’s supply power failed.
MIA 304 The system's cooling fan recovered.
MIA 305 The system's supply power recovered.
MIA 306 This load balancing server %s recovered.
MIA 307 The load balancing server %s does not respond.
MIA 308 Heartbeats lost.
50 WatchGuard System Manager