WSM Reference Guide - WatchGuard Technologies
WSM Reference Guide - WatchGuard Technologies
WSM Reference Guide - WatchGuard Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Event Logs<br />
Event Log Message Catalog<br />
Log Module Log Message ID Message<br />
DVCPCD 1041 The Firebox cannot get certificates from this server %s, %s<br />
DVCPCD 1042 The Firebox is importing the CA certificate<br />
DVCPCD 1043 The Firebox cannot import the CA certificate<br />
DVCPCD 1044 The Firebox imported the CA certificate<br />
DVCPCD 1045 The Firebox is importing the VPN certificate<br />
DVCPCD 1046 Cannot import the VPN certificate<br />
DVCPCD 1047 Successfully imported the VPN certificate<br />
DVCPCD 1050 Cannot load configuration (export xml config)<br />
DVCPCD 1051 Requesting new configuration from server %s<br />
DVCPCD 1052 Cannot download configuration from server %s, %s<br />
DVCPCD 1053 Cannot save this new configuration: %s<br />
DVCPCD 1054 The new configuration was saved<br />
HAM 0 The HA manager is initialized and enabled<br />
HAM 2 The Firebox is now in active mode<br />
HAM 4 The Firebox starts with HA disabled<br />
HAM 7 Firebox restart completed and HA is now ready<br />
HAM 20 The Configuration manager sets HA manager with invalid HA type: %d<br />
HAM 107 HA: The Firebox did not complete the secure transport channel process<br />
(error: %s)<br />
HAM 108 Secure channel is dropped! (error:%s)<br />
HAM 110 TCP connection was broken! (error:%s)<br />
HAM 214 HA: Received a fail notification from peer (error:%s)<br />
HAM 218 HA: Start the forced failover process (error:%s)<br />
HAM 222 HA:The hotsync procedure failed (error:%s)<br />
HAM 231 HA: The secure channel was not set (rc=%d)<br />
HAM 232 HA: Mismatched HA peer information (error:%s)<br />
HAM 233 HA: The peer Firebox is upgrading. Need to takeover!<br />
HAM 234 HA event monitor is enabled and the system starts from the WAITADMIN<br />
state<br />
HAM 301 HA: The HA link is down on port %d<br />
HAM 302 HA: The Firebox is misssing the MIA heartbeat<br />
HAM 304 HA: The Firebox will failover because (%s). Info=%d<br />
HAM 307 HA: The Firebox is now active because of peer restarts or because peer is<br />
unavailable<br />
HAM 308 HA: The Firebox is in standby mode<br />
HAM 310 HA: Process the forced failover command<br />
IKE 0 There is no CA Certificate available for the certificate payload build<br />
IKE 1 Cannot convert the CA name from DER to X509<br />
IKE 2 Certificate chain forming failure because there is no matching certificate<br />
<strong>Reference</strong> <strong>Guide</strong> 49