SiLabs Si2400 - Connect One
SiLabs Si2400 - Connect One
SiLabs Si2400 - Connect One
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Reference Design<br />
Use Low<br />
Profile<br />
Oscillator<br />
R53 not<br />
populated<br />
R52, R58<br />
and R59<br />
populated<br />
Remove JP2 pin<br />
8 and pin11<br />
Install Jumpers<br />
JP5 & JP6<br />
Remove R56 and R54<br />
Add 0O resistors R55 and R57<br />
Figure 2. Changes needed on <strong>Si2400</strong> REV 3.0 board to populate SL-IERB<br />
Page 6<br />
July 2001