Landscape Drip Application Guide - Rain Bird irrigation
Landscape Drip Application Guide - Rain Bird irrigation
Landscape Drip Application Guide - Rain Bird irrigation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
RAIN BIRD XB PC SERIES<br />
Pressure Compensating Self-Piercing Emitters.<br />
Color code to identify the flow rate.<br />
This pressure compensating emitter provides<br />
flow uniformity on uneven terrain.<br />
The only emitter with self-piercing barbs,<br />
making them the easiest to install using<br />
the Xeriman TM tool.<br />
XB-05-PC<br />
(1.9 l/h)<br />
XB-10-PC<br />
(3.8 l/h)<br />
XB-20-PC<br />
(7.6 l/h)<br />
Installation Option 1<br />
Using a Xeriman Tool,<br />
insert an emitter directly<br />
into 16 mm drip tubing or<br />
between dripline emitters<br />
as needed.<br />
3<br />
Installation Option 2<br />
For more precise water placement, use<br />
4-6 mm distribution tubing, a 6 mm<br />
tubing stake, and a bug cap.<br />
7<br />
6<br />
11<br />
3<br />
Installation Option 3<br />
For precise water placement, a<br />
barbed connector can be<br />
punched into distribution<br />
tubing. The emitter is then<br />
placed at the end of the<br />
4-6 mm distribution tubing.<br />
NOTE: should the emitter<br />
become dislodged,<br />
unregulated flow will occur.<br />
9<br />
17 5<br />
8<br />
7<br />
6<br />
Installation Option 4<br />
The 6 Outlet Manifold provides a<br />
centralized water distribution<br />
connection for up to six emission<br />
devices. Connect the 4-6 mm<br />
distribution tubing to one of the outlets.<br />
Use a 6 mm tubing stake to ensure<br />
precise water placement. The emitter is<br />
placed on the end of the 4-6 mm<br />
distribution tubing to regulate the water<br />
flow. NOTE: should the emitter become<br />
dislodged, unregulated flow will occur.<br />
3<br />
7<br />
6<br />
7<br />
23<br />
EMT-6X<br />
6 Outlet Manifold<br />
½” (15/21) inlet threads onto ½” riser and provides a<br />
manifold with six free-flowing ¼” barb outlets.<br />
Installation Option 1<br />
The 6 Outlet Manifold provides a centralized water<br />
distribution connection for up to six emission devices.<br />
Connect 4-6 mm distribution tubing to one of the<br />
outlets. Use a 6 mm tubing stake to ensure precise<br />
water placement. The emitter is placed on the end of<br />
the 4-6 mm distribution tubing to regulate the water<br />
flow.<br />
Installation Option 2<br />
To incorporate spray heads into<br />
your drip system, connect the<br />
Xeri-Pop Micro-Spray to a<br />
multi-outlet manifold (EMT-6X) via<br />
4-6 mm distribution tubing.<br />
Installation Option 3<br />
To incorporate Micro-Sprinklers or Micro-<br />
Sprays into your drip system, connect the<br />
needed product to a multi-outlet manifold<br />
(EMT-6X) via 4-6 mm distribution tubing.<br />
20<br />
8<br />
TIP: Be conscious of your run times<br />
and application rates. Mixing products<br />
connected to the EMT-6X can lead to over<br />
or under watering.<br />
6 www.rainbird.eu