CTX941 V.1 Dvb-T/Tv-Dual Tuner Card - CREATIX
CTX941 V.1 Dvb-T/Tv-Dual Tuner Card - CREATIX
CTX941 V.1 Dvb-T/Tv-Dual Tuner Card - CREATIX
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
IO-Connector: J2 – TV-Antenna DVB-T main Antenna<br />
J5-Pin Layout: 1 - GND<br />
2 - GND<br />
3 - C-IN-S-Video<br />
4 - YIN_S-Video<br />
Power consumption: 3.3V – 500 mA<br />
5V – 1550 mA<br />
J3 – TV-Antenna analog auxiliary-Antenna<br />
J4 – Composite Video-In<br />
J5 – S-Video-In<br />
9.4W<br />
Mini PCI Type IIIA PCB Details<br />
Since the Type III form factor uses a card edge connector, the following drawings provide the<br />
printed circuit board (PCB) details required to fabricate a Type III <strong>Card</strong>. The Type III PCB is<br />
characterized by the following guidelines:<br />
- All dimensions are in millimeters, unless otherwise specified.<br />
- All dimension tolerances are ±.15 mm, unless otherwise specified.<br />
- Edge contact pads on the top and bottom of PCB shall be electroless gold plating 0.05<br />
mm Min. over electroless NI plating 2 mm Min. The figure below shows the Type III PCB<br />
form factor.<br />
- Insulating material shall not interfere with or obstruct mounting holes or grounding pads.<br />
- The EMC grounding pads shall have a conductive finish and be non-corrosive with the<br />
latch arms.<br />
Creatix Polymedia GmbH<br />
Heinrich-Barth-Strasse 3<br />
D-66115 Saarbrücken<br />
Telefon: +49 681 9811 300<br />
Fax: +49 681 9811 390
Change language