Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron

More documents

Recommendations

Info

Text message Text identifier reaction of the system AIS: UTC clock lost 007 Continue operation using indirect or semaphore synchronisation AIS: external DGNSS in use 021 Continue operation AIS: external GNSS in use 022 Continue operation AIS: internal DGNSS in use (beacon) 023 Continue operation AIS: internal DGNSS in use (msg 17) 024 Continue operation AIS: internal GNSS in use 025 Continue operation AIS: surveyed position in use 041 Continue operation AIS: UTC clock OK 042 Continue operation AIS: System Started 051 Continue operation 5.7.5 GLL Geographic position latitude/longitude Latitude and longitude of vessel position, time of position fix and status. $--GLL, llll.ll, a, yyyyy.yy, a, hhmmss.ss, A, a *hh NOTE: Positioning system Mode indicator: A = Autonomous D = Differential E = Estimated (dead reckoning) M = Manual input S = Simulator N = Data not valid Mode indicator Status: A = data valid V = data invalid Time of position (UTC) Longitude , E/W Latitude, N/S 82694_Op&Ins MAN_RA2500_D 5-18
5.7.6 GGA Global positioning system (GPS) fix data Time, position and fix-related data for a GPS receiver. $--GGA, hhmmss.ss, llll.ll, a, yyyyy.yy, a, x, xx, x.x, x.x, M, x.x, M, x.x, xxxx*hh Differential reference station ID 0000-1023 (Not used) Age of diff. GPS data (Not used) Units of geoidal separation,m (Not used) Geoidal separation (Not used) Units of antenna altitude, m (Not used) Antenna altitude above/below mean sea level (geoid) (Not used) Horizontal dilution of precision (Not used) No. of satellites in use, 00-12 (Not used) GPS quality indicator Longitude E/W Latitude N/S UTC time of position 82694_Op&Ins MAN_RA2500_D 5-19
Page 1 and 2: 82693_Op&Ins MAN_TR2500_D 1
Page 3 and 4: COG See COURSE OVER GROUND COURSE O
Page 5 and 6: MMI Man Machine Interface NMEA Nati
Page 7 and 8: Amendment Record AMENDMENT NO. INCO
Page 9 and 10: LIST OF CONTENTS 1 GENERAL ........
Page 11 and 12: 1 GENERAL 1.1 Features The RA-2500
Page 13 and 14: 1.3 System overview The system is b
Page 15 and 16: RECEIVER Sensitivity TR-2500 RECEIV
Page 17 and 18: 3.2 Using Ethernet interface Using
Page 19 and 20: 4 INSTALLATION Important notice In
Page 21 and 22: Vertical separation distance and di
Page 23 and 24: 4.3 Receiver unit When selecting a
Page 25 and 26: 4.3.3 Bracket mounting hole measure
Page 27 and 28: 5 OPERATION Figure 5.0, Front view
Page 29 and 30: 5.3 Connecting power After connecti
Page 31 and 32: 5.3.1.2 Selection of IP address Be
Page 33 and 34: Menu: Current Senso 1/5 LAT: --- LO
Page 35 and 36: Select “SW Version” menu by pre
Page 37 and 38: Source: Surveyed ↑=Inte The Surve
Page 39 and 40: 5.5 Description of sentence format
Page 41 and 42: 5.6.3 Format BCF: Configure RA-2500
Page 43: 5.7.3 ALR - Set alarm state. Local
Page 47 and 48: 7 WIRING AND CONNECTIONS 7.1 RA-250
Page 49 and 50: 7.3 Description of 24VDC connection
Page 51 and 52: 9 LIST OF VHF CHANNELS Channel no.
Page 53 and 54: 10.2 Procom CXL 2-1/l Maritime VHF
Page 55 and 56: 10.4 BNC connector 95299, Suhner 24
Page 57 and 58: 10.8 N Connector Male 80581, Suhner
Page 59: 82694_Op&Ins MAN_RA2500_D 11-2

Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?