Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron

More documents

Recommendations

Info

5.4.5.1 Receiver channels Select “Recv. Channels.” menu by pressing numeric key [1] or [arrow up/down] keys and press [Enter ] key. Menu: Recv. Channel 1/2 1 Ch.A: 2087 Ch.B 2088 From this menu it is possible to set the frequencies of the two receiving channels. Ch. A: 2087 Range: 0 to 2287 Set value for selected channel. Repeat for Ch. B. Save Changes? No ↑=No ↓=Yes 5.4.5.2 Positioning Source From “Config” menu select “Positioning Source” menu by pressing numeric key [2] or [arrow up/down] keys and press [Enter ] key. Menu: Pos source 1/1 Source: Internal Select between Internal, External or Surveyed source. Source: Internal ↑=Surv ↓=Exte Select by using the arrow keys. 82694_Op&Ins MAN_RA2500_D 5-10
Source: Surveyed ↑=Inte The Surveyed source is a static precise position to be entered manually for a RA-2500. Menu: Pos. Source Source: Surveyed Lat: 9100.000 Dir.: South Lon.: 18100.0000 Dir.: West Pos.Acc: Low Press [Esc] key to go back to “Config” menu. 5.4.5.3 I/O Ports From “Config” menu select “I/O Ports” menu by pressing numeric key [3] or [arrow up/down] keys and press [Enter ] key. Menu: I/O Ports - Sp 1/3 1. Speed 2. Own IP Address 3. VTS IP Address Press [Enter] key or numeric key [1] to select data speed . Menu: I/O Ports - Sp 1/6 P1 (Sensor1) 4800 P2 (Sensor2) 4800 P3 (Sensor3) 4800 P4 (Ext. disp.) 38400 P5 (Pilot) 38400 P6 (Spare) 38400 This menu allows the setting of data speed at port1 to port 6 of 4800 b/s or 38400 b/s. Press [Enter] key to select “P1”. 82694_Op&Ins MAN_RA2500_D 5-11
Page 1 and 2: 82693_Op&Ins MAN_TR2500_D 1
Page 3 and 4: COG See COURSE OVER GROUND COURSE O
Page 5 and 6: MMI Man Machine Interface NMEA Nati
Page 7 and 8: Amendment Record AMENDMENT NO. INCO
Page 9 and 10: LIST OF CONTENTS 1 GENERAL ........
Page 11 and 12: 1 GENERAL 1.1 Features The RA-2500
Page 13 and 14: 1.3 System overview The system is b
Page 15 and 16: RECEIVER Sensitivity TR-2500 RECEIV
Page 17 and 18: 3.2 Using Ethernet interface Using
Page 19 and 20: 4 INSTALLATION Important notice In
Page 21 and 22: Vertical separation distance and di
Page 23 and 24: 4.3 Receiver unit When selecting a
Page 25 and 26: 4.3.3 Bracket mounting hole measure
Page 27 and 28: 5 OPERATION Figure 5.0, Front view
Page 29 and 30: 5.3 Connecting power After connecti
Page 31 and 32: 5.3.1.2 Selection of IP address Be
Page 33 and 34: Menu: Current Senso 1/5 LAT: --- LO
Page 35: Select “SW Version” menu by pre
Page 39 and 40: 5.5 Description of sentence format
Page 41 and 42: 5.6.3 Format BCF: Configure RA-2500
Page 43 and 44: 5.7.3 ALR - Set alarm state. Local
Page 45 and 46: 5.7.6 GGA Global positioning system
Page 47 and 48: 7 WIRING AND CONNECTIONS 7.1 RA-250
Page 49 and 50: 7.3 Description of 24VDC connection
Page 51 and 52: 9 LIST OF VHF CHANNELS Channel no.
Page 53 and 54: 10.2 Procom CXL 2-1/l Maritime VHF
Page 55 and 56: 10.4 BNC connector 95299, Suhner 24
Page 57 and 58: 10.8 N Connector Male 80581, Suhner
Page 59: 82694_Op&Ins MAN_RA2500_D 11-2

Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron

Create successful ePaper yourself

Delete template?

Save as template?