Operators and Installation Manual RA-2500 AIS Receiver.pdf - Jotron

Menu: Config 1/4
1 Recv. Channels
2 Position Source
3 I/O Ports
4 Buzzer
Select ‘ I/O Ports” followed by [Enter] key
5.3.1.1 Set Own IP address
Menu: I/O Ports 2/3
1 Speed .
2 Own IP Address
3 VTS IP Address
Select “Own IP address” then [Enter] key
Now the IP address of the RA-2500 can be entered.
Menu: Own IP Addr 1/2
1 IP = 0.0.0.0
2 Port = 5000
Enter an unique IP address on the network you are connected. See chapter 5.3.1.2.
The Port number is default to “5000”, but can be altered. This must of course be the same on the
RA-2500 and the computer connected.
Press [Enter] when done. When you have saved the settings, you will press [ESC] to return to
previous menu levels.
82694_Op&Ins MAN_RA2500_D 5-4