Swiss Instruments - Electronic Indicators - Swiss Instruments Ltd
Swiss Instruments - Electronic Indicators - Swiss Instruments Ltd Swiss Instruments - Electronic Indicators - Swiss Instruments Ltd
Electronic Indicators External Micrometers 86.5 TESA DIGICO 12 – HP Models • High-precision measuring system • IP65 compliant – Water and coolant resistant • Combined analog/digital display • Analog readout: ± 0.025 – ±1.25 mm • Measuring modes: NOR/MIN/MAX/MAX-MIN • 1.73 in / 44 mm diameter dial • RS-232 data output combined with external power supply • Patented inductive measuring system • Zero-setting of display • Direct inch/metric conversion • Automatic shut down. Can also be locked 13 Ø 8 h6 Ø 4 Ø 44 19.3 5 42.5 13 in in mm mm Models IP65 with electronic module protected against the penetration of liquids 01930134 28890 0.210 0.00005 or 0.0005 5 0.001 or 0.01 Models IP65 with both mechanics and electronics protected against the penetration of liquids 01930135 29546 0.210 0.00005 or 0.0005 5 0.001 or 0.01 5.5 18 50.5 12.5 50.5 18 16.3 84.8 1.65 60∞ 8.54 6.4 ø 1.5 ✓ LCD, 5 digits + sign Digit height: 24 in / 6 mm Zero-setting of display Max. error: 4 μm 2 μm 0.4 to 0.75 N (±0.15 N) Max. 2 m/s Number of measurements per second: 9 Working tempe - rature range: 41 °F to 104 °F / +5 °C to +40 °C 3V lithium battery, type CR 2032 Battery life: > 4000 hours (Diagram dimensions shown in mm) RS-232 2.5 oz / 70 g 19.05 Accessories 03238013 29547 Back with lug 01961012 29548 Upper lift lever 01960005 29549 Lower lift lever 01961013 29550 Pneumatic retraction device 04761060 29551 RS-232 connection cable with external power supply 01961000 29552 3V lithium battery, type CR 2032, 190 mAh 50 10 1 EN 61326-1 IP65 (IEC 529) Shipping packaging incl. 1 lithium battery, type CR 2032 (No. 01961000) Serial number 9.5 ø 6.4 6.4 24.5 55 52.5 5 Inspection report with a declaration of conformity 14.3 01961012 Ø 2.5/4 26.2 15 E-8 03238013 (Diagram dimensions shown in mm) 5 9 01961013
1 in / 25.4 mm Range LC display. 6 digits plus minus sign 1 μm mm / in Conversion RS-232 Output External Micrometers Electronic Indicators External Micrometers Digit-Dial ® plus Digital Indicator Digit-Dial plus con forms to AGD Group 2 mechanical spec i fi ca tions. Its ex cel lent re sponse al lows spindle travel up to 20 in/sec. In addition, Digit-Dial plus features selection of either English or metric readout with direct con ver sion, preset ca pa bil ity, a se lectable display pro vid ing maxi mum, minimum and range values with out put for SPC applications: Measuring range . . . . . . . . . . 1 in. (25.4 mm) Display . . . . . . . . . . . . . . . . . . 6 digit LCD with sign Resolution. . . . . . . . . . . . . . . . 0.00005 in. (1 μm) Accuracy at 68° F (20° C) . . . ±0.00005 in. (±1 μm) Response speed . . . . . . . . . . 20 in/sec (500 mm/sec) Measuring force . . . . . . . . . . . 5.3 oz. (150 g) Display mode . . . . . . . . . . . . . Maximum value, Mini mum value or Range (maxi mum to mini mum), Absolute, Preset Power supply 120 VAC/60 Hz AC adapter (part number 99-1033-2) or self-con tained re charge able bat tery, con tinu ous op era tion for 8 hours on full charge (part number 99-1033-17). 5.3 oz / 150 g Ordering Information: 599-1033 25843 Digit-Dial plus 596-1033-82 87011 Optional Output Cable RS-232 - 25 Pin - for PC 595-G-0196B 25463 Optional Output Cable - 10 Pin Accessories 599-1033-12 25848 Digit-Dial plus Lift Lever 599-1033-13 25849 Digit-Dial plus Contact Point 599-1033-14 25850 Digit-Dial plus Flat Back 599-1033-15 25851 Digit-Dial plus Lug Back 599-1033-16 25852 Digit-Dial plus 1" Dust Bellow 599-1033-17 25956 Digit-Dial plus Release Cable Adapter 599-1033-18 25957 Digit-Dial plus Air Release Cable 599-1033-19 25958 Digit-Dial plus Mech. Release Cable Digit-Dial plus Lift Lever Digit-Dial plus Air Release Cable Digit-Dial plus Mech. Release Cable E-9
- Page 1 and 2: External Micrometers Electronic Ind
- Page 3 and 4: External Micrometers Electronic Ind
- Page 5: External Micrometers Electronic Ind
1 in / 25.4 mm<br />
Range<br />
LC display.<br />
6 digits<br />
plus minus sign<br />
1 μm<br />
mm / in<br />
Conversion<br />
RS-232<br />
Output<br />
External Micrometers<br />
<strong>Electronic</strong> <strong>Indicators</strong><br />
External Micrometers<br />
Digit-Dial ® plus Digital Indicator<br />
Digit-Dial plus con forms to AGD Group 2 mechanical spec i fi ca tions. Its<br />
ex cel lent re sponse al lows spindle travel up to 20 in/sec. In addition, Digit-Dial<br />
plus features selection of either English or metric readout with direct con ver sion,<br />
preset ca pa bil ity, a se lectable display pro vid ing maxi mum, minimum and range<br />
values with out put for SPC applications:<br />
Measuring range . . . . . . . . . . 1 in. (25.4 mm)<br />
Display . . . . . . . . . . . . . . . . . . 6 digit LCD with sign<br />
Resolution. . . . . . . . . . . . . . . . 0.00005 in. (1 μm)<br />
Accuracy at 68° F (20° C) . . . ±0.00005 in. (±1 μm)<br />
Response speed . . . . . . . . . . 20 in/sec (500 mm/sec)<br />
Measuring force . . . . . . . . . . . 5.3 oz. (150 g)<br />
Display mode . . . . . . . . . . . . . Maximum value, Mini mum<br />
value or Range (maxi mum<br />
to mini mum), Absolute, Preset<br />
Power supply<br />
120 VAC/60 Hz AC adapter<br />
(part number 99-1033-2)<br />
or self-con tained re charge able<br />
bat tery, con tinu ous op era tion<br />
for 8 hours on full charge<br />
(part number 99-1033-17).<br />
5.3 oz / 150 g<br />
Ordering Information:<br />
599-1033 25843 Digit-Dial plus<br />
596-1033-82 87011 Optional Output Cable<br />
RS-232 - 25 Pin - for PC<br />
595-G-0196B 25463 Optional Output Cable - 10 Pin<br />
Accessories<br />
599-1033-12 25848 Digit-Dial plus Lift Lever<br />
599-1033-13 25849 Digit-Dial plus Contact Point<br />
599-1033-14 25850 Digit-Dial plus Flat Back<br />
599-1033-15 25851 Digit-Dial plus Lug Back<br />
599-1033-16 25852 Digit-Dial plus 1" Dust Bellow<br />
599-1033-17 25956 Digit-Dial plus Release Cable Adapter<br />
599-1033-18 25957 Digit-Dial plus Air Release Cable<br />
599-1033-19 25958 Digit-Dial plus Mech. Release Cable<br />
Digit-Dial plus<br />
Lift Lever<br />
Digit-Dial plus<br />
Air Release Cable<br />
Digit-Dial plus<br />
Mech. Release Cable<br />
E-9