Swiss Instruments - Electronic Indicators - Swiss Instruments Ltd

Electronic Indicators
External Micrometers
in in mm mm μm Amm Bmm g
599-1034 86378 1 0.00005 25 0.001 5 78.4 53.4 130
19.30110 26756 0.5 0.0005 12.5 0.01 10 65.9 53.4 120
19.30111 26757 1 0.0005 25 0.01 10 78.4 53.4 130
19.30112 26758 2 0.0005 50 0.01 20 150.5 90.5 210
19.30113 26759 4 0.0005 100 0.01 20 250.5 140.5 250
19.30101 26753 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30100 26760 1 0.00005 25 0.001 5 78.4 53.4 130
19.30102 26754 2 0.00005 50 0.001 12 150.5 90.5 210
19.30103 26755 4 0.00005 100 0.001 15 250.5 140.5 250
IEC 60529:
IP 51
See tables
Supplied in a
suited carrying
case with:
1 lithium battery, type
CR 2032, No. 19.61000
Identification
number
Inspection
report with a
declaration of conformity
DIGICO® 11
With same basic features as set forth on page E-7 plus the following functions:
• Possible entry of limiting values for classification through color LEDs:
green for “Good”, red for “Scrap”, amber for “Rework”.
• Value storage using the functions “Highest value”, “Lowest value” and
“Highest value minus lowest value”.
• Counting sense reversal.
in in mm mm μm Amm Bmm g
19.30104 27281 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30105 27280 1 0.00005 25 0.001 5 78.4 53.4 130
DIGICO® MIN/MAX
With same basic features as DIGICO 11 except that PRESET function is
not available.
• Mainly used for value classification through the function “Highest value
minus lowest value”.
in in mm mm μm Amm Bmm g
E-6
19.30120 28637 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30121 28638 1 0.00005 25 0.001 5 78.4 53.4 130