Swiss Instruments - Electronic Indicators - Swiss Instruments Ltd

External Micrometers
Electronic Indicators
External Micrometers
DIGICO® 1 and 2
Electronic Indicators
Both models are remarkable for their versatile functions, large measuring span
and high accuracy.
✓
LC display
with colored
background
6 digits plus
minus sign
.354" x .177"/
9 x 4.5 mm digit
height (HxW)
• Analog and digital display.
• Digital display can be placed in any position for easy reading.
• Zero-setting at any point within the measuring span.
• Data input through the keyboard.
• Counting sense reversal.
• Classification of measured values through symbols; in the external power
supply mode, the display lights up with a green background or changes to
orange or red if the part is not within tolerance.
• Value storage by means of the functions “Highest value”, “Lowest value” or
“Highest value minus lowest value”.
See the
table opposite
mm / in
Conversion
1.50 in / 40 mm
scale length
25
scale divisions
According to
selected
tolerances
1.20 in/ 30.4 mm
(DIGICO 1)
or 2.376 in / 60.4 mm
(DIGICO 2)
Incremental
glass scale
Max. 1 m/s
(DIGICO 1) or
max. 2 m/s (DIGICO 2)
Plunger
guiding
on a plain bearing
M2.5 thread for the
measuring insert
DIGICO 1: 2 μm
DIGICO 2: 3 μm
1 μm
1 μm
See table
on page E-4
RS-232
3.6 V
lithium battery
or mains adapter
in in mm mm
19.30000 86508 DIGICO 1 1.18 0.00005 or 0.0005 30 0.001 or 0.01
19.30001 26752 DIGICO 2 3.36 0.00005 or 0.0005 60 0.001 or 0.01
E-3

Electronic Indicators
External Micrometers
Measuring Force
DIGICO 1 DIGICO 2
Measuring force* close
to the plunger stop
– bottom: 0.85 N ± 0.15 N 0.90 N ± 0.20 N
– top: 1.10 N ± 0.20 N 1.45 N ± 0.25 N
Force hysteresis*: 0.10 N 0.15 N
* Valid with the indicator used vertically, with downward oriented
plunger, or in static measurement.
≈ 1000 h with
lithium battery
0.002 % / °C
50 °F to 104 °F
50 °F to 122 °F
✓
Degree of
protection
(IEC 60529): IP 54
(standard model
housing)
.6 lb/ 290 g
(DIGICO 1)
.7 lb/ 310 g (DIGICO 2)
Moved mass (plunger):
DIGICO 1: 28 g
DIGICO 2: 27 g
Supplied
in a suited
carrying case with:
1 lithium battery
No. 19.60007
1 lever No. 19.60005
Identification
number
Inspection
report with a
declaration of conformity
Accessories for DIGICO® 1 and 2
47.61057 88310 110 V mains adapter
19.60007 26761 3.6 V lithium battery, LR6, AA
19.60005 86331 Lever for the plunger retraction
35.40203 41139 Plunger retract cable, 8.5 in/ 220 mm long
✓
E-4

External Micrometers
Electronic Indicators
External Micrometers
Brown & Sharpe Series 1034,
DIGICO® 10 and 11 Electronic Indicators
These three versions are made for optimum adaptation to your metrologybased
applications.
✓
LC display.
6 digits
plus minus sign
.335 in / 8.5 mm
digit height
See tables
• Zero-setting of display anywhere within the measuring span.
• Display and keyboard rotate through 270°.
• Ability to hold the measured values.
• Digit entry (PRESET function).
• Two reference points.
• Digital output.
Models DIGICO® 10
Provided with all the features listed above.
mm / in
Conversion
Glass scale
with capacitive,
incremental divisions
Max. perm.:
1.5 m / s
Case in light
alloy. Front face
in polyamide.
Stainless steel plunger
guided on a plain bearing.
M2.5 thread for the
measuring insert.
See tables
2 μm
2 μm
(.0001"/0.001 mm)
RS-232,
opto-coupled
3V lithium
battery, type
CR 2032.
DIGICO 10:
≈ 4000 h
DIGICO 11 / MIN/MAX:
≈ 2000 h
41 °F to 104 °F
68 °F to 140 °F
EN 50081-1:
1993
EN 50082-1: 1993
599-1034
E-5

Electronic Indicators
External Micrometers
in in mm mm μm Amm Bmm g
599-1034 86378 1 0.00005 25 0.001 5 78.4 53.4 130
19.30110 26756 0.5 0.0005 12.5 0.01 10 65.9 53.4 120
19.30111 26757 1 0.0005 25 0.01 10 78.4 53.4 130
19.30112 26758 2 0.0005 50 0.01 20 150.5 90.5 210
19.30113 26759 4 0.0005 100 0.01 20 250.5 140.5 250
19.30101 26753 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30100 26760 1 0.00005 25 0.001 5 78.4 53.4 130
19.30102 26754 2 0.00005 50 0.001 12 150.5 90.5 210
19.30103 26755 4 0.00005 100 0.001 15 250.5 140.5 250
IEC 60529:
IP 51
See tables
Supplied in a
suited carrying
case with:
1 lithium battery, type
CR 2032, No. 19.61000
Identification
number
Inspection
report with a
declaration of conformity
DIGICO® 11
With same basic features as set forth on page E-7 plus the following functions:
• Possible entry of limiting values for classification through color LEDs:
green for “Good”, red for “Scrap”, amber for “Rework”.
• Value storage using the functions “Highest value”, “Lowest value” and
“Highest value minus lowest value”.
• Counting sense reversal.
in in mm mm μm Amm Bmm g
19.30104 27281 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30105 27280 1 0.00005 25 0.001 5 78.4 53.4 130
DIGICO® MIN/MAX
With same basic features as DIGICO 11 except that PRESET function is
not available.
• Mainly used for value classification through the function “Highest value
minus lowest value”.
in in mm mm μm Amm Bmm g
E-6
19.30120 28637 0.5 0.00005 12.5 0.001 5 65.9 53.4 120
19.30121 28638 1 0.00005 25 0.001 5 78.4 53.4 130

External Micrometers
Electronic Indicators
External Micrometers
✓
LCD,
5 digits + sign
Digit height:
.24 in / 6 mm
Zero-setting of
display
Max. error:
20 μm
5 μm
0.5 to 0.9 N
(±0.15 N)
max. 2 m/s
TESA DIGICO 12
Mini-Dial Gages, Electronic
IP65 compliant – Made to measure in extreme workshop conditions. Water and
coolant resistant.
TESA DIGICO 12 Standard Models
• 1.73 in / 44 mm diameter dial
• IP65 compliant – Water and coolant resistant
• RS-232 data output combined with
external power supply
• Patented inductive measuring system
• Choice between absolute “ABS” and
relative “REL” measuring modes
• Numerical display
• PRESET function
• Switchable measuring direction
• Direct inch/metric conversion
• Automatic shut down
19.3
5
Number of
measurements
per second: 7
Working tempe -
rature range:
41 °F to 104 °F /
+5 °C to +40 °C
3V lithium battery,
type CR 2032
Battery life:
> 3500 hours
101.5
13
Ø 8 h6
Ø 4
Ø 44
42.5
13
13 18 58 12.5
58
18
25.8
101.8
RS-232
2.5 oz / 70 g
60∞
8.54
EN 61326-1
1.65
6.4
ø 1.5
IP65 (IEC 529)
Shipping
packaging
incl. 1 lithium
battery, type CR 2032
(No. 01961000)
Serial number
Declaration of
conformity
(Diagram dimensions shown in mm)
in in mm mm
Models IP65 with electronic module protected against the penetration of liquids
01930130 29017 0.5 0.0005 12.5 0.01 without
01930132 29018 0.5 0.00005 or 0.0005 12.5 0.001 or 0.01 with
Models IP65 with both mechanics and electronics protected against the penetration of liquids
01930131 28885 0.5 0.0005 12.5 0.01 without
01930133 28884 0.5 0.00005 or 0.0005 12.5 0.001 or 0.01 with
E-7

Electronic Indicators
External Micrometers
86.5
TESA DIGICO 12 – HP Models
• High-precision measuring system
• IP65 compliant – Water and coolant resistant
• Combined analog/digital display
• Analog readout: ± 0.025 – ±1.25 mm
• Measuring modes: NOR/MIN/MAX/MAX-MIN
• 1.73 in / 44 mm diameter dial
• RS-232 data output combined with
external power supply
• Patented inductive measuring system
• Zero-setting of display
• Direct inch/metric conversion
• Automatic shut down. Can also be locked
13
Ø 8 h6
Ø 4
Ø 44
19.3
5
42.5
13
in in mm mm
Models IP65 with electronic module protected against the penetration of liquids
01930134 28890 0.210 0.00005 or 0.0005 5 0.001 or 0.01
Models IP65 with both mechanics and electronics protected against the penetration of liquids
01930135 29546 0.210 0.00005 or 0.0005 5 0.001 or 0.01
5.5 18 50.5 12.5
50.5
18
16.3
84.8
1.65
60∞
8.54
6.4
ø 1.5
✓
LCD,
5 digits + sign
Digit height:
24 in / 6 mm
Zero-setting
of display
Max. error:
4 μm
2 μm
0.4 to 0.75 N
(±0.15 N)
Max. 2 m/s
Number of
measurements
per second: 9
Working tempe -
rature range:
41 °F to 104 °F /
+5 °C to +40 °C
3V lithium
battery,
type CR 2032
Battery life:
> 4000 hours
(Diagram dimensions shown in mm)
RS-232
2.5 oz / 70 g
19.05
Accessories
03238013 29547 Back with lug
01961012 29548 Upper lift lever
01960005 29549 Lower lift lever
01961013 29550 Pneumatic retraction device
04761060 29551 RS-232 connection cable with external power supply
01961000 29552 3V lithium battery, type CR 2032, 190 mAh
50
10
1
EN 61326-1
IP65 (IEC 529)
Shipping
packaging
incl. 1 lithium
battery, type CR 2032
(No. 01961000)
Serial number
9.5
ø 6.4
6.4
24.5
55
52.5
5
Inspection report
with a declaration
of conformity
14.3
01961012
Ø 2.5/4
26.2
15
E-8
03238013
(Diagram dimensions shown in mm)
5
9
01961013

1 in / 25.4 mm
Range
LC display.
6 digits
plus minus sign
1 μm
mm / in
Conversion
RS-232
Output
External Micrometers
Electronic Indicators
External Micrometers
Digit-Dial ® plus Digital Indicator
Digit-Dial plus con forms to AGD Group 2 mechanical spec i fi ca tions. Its
ex cel lent re sponse al lows spindle travel up to 20 in/sec. In addition, Digit-Dial
plus features selection of either English or metric readout with direct con ver sion,
preset ca pa bil ity, a se lectable display pro vid ing maxi mum, minimum and range
values with out put for SPC applications:
Measuring range . . . . . . . . . . 1 in. (25.4 mm)
Display . . . . . . . . . . . . . . . . . . 6 digit LCD with sign
Resolution. . . . . . . . . . . . . . . . 0.00005 in. (1 μm)
Accuracy at 68° F (20° C) . . . ±0.00005 in. (±1 μm)
Response speed . . . . . . . . . . 20 in/sec (500 mm/sec)
Measuring force . . . . . . . . . . . 5.3 oz. (150 g)
Display mode . . . . . . . . . . . . . Maximum value, Mini mum
value or Range (maxi mum
to mini mum), Absolute, Preset
Power supply
120 VAC/60 Hz AC adapter
(part number 99-1033-2)
or self-con tained re charge able
bat tery, con tinu ous op era tion
for 8 hours on full charge
(part number 99-1033-17).
5.3 oz / 150 g
Ordering Information:
599-1033 25843 Digit-Dial plus
596-1033-82 87011 Optional Output Cable
RS-232 - 25 Pin - for PC
595-G-0196B 25463 Optional Output Cable - 10 Pin
Accessories
599-1033-12 25848 Digit-Dial plus Lift Lever
599-1033-13 25849 Digit-Dial plus Contact Point
599-1033-14 25850 Digit-Dial plus Flat Back
599-1033-15 25851 Digit-Dial plus Lug Back
599-1033-16 25852 Digit-Dial plus 1" Dust Bellow
599-1033-17 25956 Digit-Dial plus Release Cable Adapter
599-1033-18 25957 Digit-Dial plus Air Release Cable
599-1033-19 25958 Digit-Dial plus Mech. Release Cable
Digit-Dial plus
Lift Lever
Digit-Dial plus
Air Release Cable
Digit-Dial plus
Mech. Release Cable
E-9