Operating and brewing instructions 50l april 2008 - Speidel Tank
Operating and brewing instructions 50l april 2008 - Speidel Tank
Operating and brewing instructions 50l april 2008 - Speidel Tank
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Speidel</strong>’s Master Brewer<br />
Open the pump:<br />
It should be possible to open the pump housing<br />
by h<strong>and</strong>. If it is not, you should use a small block<br />
of wood <strong>and</strong> a hammer to release the union-nut.<br />
In the interior of the pump, the impeller wheel will<br />
now be visible.<br />
Caution:<br />
- the pump impeller may fall out!<br />
- damage to the impeller wheel will cause the<br />
pump to stop working properly later on!<br />
The impeller wheel is taken out of the housing for<br />
cleaning.<br />
Any <strong>brewing</strong> sediments must not be allowed to block the<br />
holes <strong>and</strong> must therefore be removed carefully.<br />
The pump housing should also be carefully cleaned.<br />
After this, replace the impeller wheel carefully in the<br />
housing.<br />
Finally, to secure the pump once more, the union<br />
nut should only be tightened by h<strong>and</strong>.<br />
Accessories: Cleaning set (item No.: 78027)<br />
Page 24 of 26
Change language