AT Commands Set

SIM5320 AT Command Set
The accuracy of the altitude, in meters(not required)
< street_num >
The building's street number(not required)
< street >
Street name(not required)
< premises >
Premises, e.g. building name(not required)
< city >
City name(not required)
< county >
County name(not required).
< region >
Region, e.g. a state in the US(not required)
< country >
Country(not required)
< country_code >
Country code(not required)
< postal_code >
Postal code. This is the zip code in the US and postcode in the UK(not required).
< date >
Date when get the address information. Output format is ddmmyy.
< GMT time >
GMT Time when get the address information. Output format is hhmmss.
< return code >
The result code of the location.
0 – OK
1 – Unknow error
2 – Invalid param error
3 – Bad got error
4 – network error
NOTE:
1. When is set to 0 and the others parameters not be given (AT+CASSISTLOC=0), the
command is to stop the location.
2.When is set to 1 or 2, is required, but ,< time_between_fix> is not
required.
3. When is set to 2 and there is an error occurred, there is not an error report, the location
is continuing.
4. The < charset > is only applicable to the address information, not include the and .
5. The coding format of and is ASCII.
Examples
SIM5320_ATC_V1.24 478
8/14/2012