AT Commands Set

SIM5320 AT Command Set
+CASSISTLOC:,,,,,,,,,,,,,,,
,
……
If ERROR occured
OK
+CASSISTLOC:
+CME ERROR:
Or (if autorun = 0):
+CME ERROR:
ERROR
Defined values
< autorun >
0 – stop location
1 – start location, only once(Must set the cid)
2 – start cycle location (Must set the cid)
< cid >
network parameters, refer to AT+CGSOCKCONT.
< language >
accept language. Refer to Google standard: en_GB, zh_CN and so on.
Not required, the default value is en_GB
< time_between_fix >
Time interval of fix(second),range: 1 second – 24 hours.
Not required, the default value is 1 second.
< charset >
charset for URC(not include the Date and Time). ASCII, UTF-8 and so on.
< latitude >
Latitude of current position. in degrees.
< longitude >
Longitude of current position. in degrees.
< altitude >
Altitude of the fix. Unit is meters(not required).
< accuracy >
The horizontal accuracy of the fix, in meters at a 95% confidence level. This is required unless the
request specified a valid location object, i.e. a request for a reverse-geocode of a known
position(not required)
< altitude_accuracy >
SIM5320_ATC_V1.24 477
8/14/2012