AT Commands Set

SIM5320 AT Command Set
A string parameter that identifies the IP address of client.
A numeric parameter that identifies the port of client, the range of permitted values is 0 to 65535.
A string parameter that displays the cause of occurring error.
Examples
AT+LISTCLIENT
+LISTCLIENT: 0, 10.71.34.32 , 80
+LISTCLIENT: 1, 10.71.78.89, 1020
OK
16.15 AT+CLOSECLIENT Disconnect specified client
Description
The command disconnects the specified client.if the client disconnects connection, an unsolicited
result code is returned.The unsolicited result code is +IPCLOSE: ,
,,.
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+CLOSECLIENT=?
Write Command
AT+CLOSECLIENT=
Responses
OK
Responses
OK
+IP ERROR:
ERROR
ERROR
Defined values
A numeric parameter that identifies the client index which will be closed, The allocated index may
be read using command AT+LISTCLIENT.
a numeric parameter that identifies reason that the connection closed.
SIM5320_ATC_V1.24 331
8/14/2012