AT Commands Set

SIM5320 AT Command Set
Execution Command
AT+CGPADDR
+CME ERROR:
Responses
[+CGPADDR: ,]
+CGPADDR: ,[...]]]
OK
ERROR
+CME ERROR:
Defined values
A numeric parameter which specifies a particular PDP context definition (see AT+CGDCONT
command). If no is specified, the addresses for all defined contexts are returned.
1…16
A string that identifies the MT in the address space applicable to the PDP. The address may be static
or dynamic. For a static address, it will be the one set by the AT+CGDCONT command when the
context was defined. For a dynamic address it will be the one assigned during the last PDP context
activation that used the context definition referred to by . is omitted if none is
available.
Examples
AT+CGPADDR =?
+CGPADDR: ( 1)
OK
AT+CGPADDR=1
+CGPADDR: 1,"0.0.0.0"
OK
15.12 AT+CGCLASS GPRS mobile station class
Description
The command is used to set the MT to operate according to the specified GPRS mobile class.
SIM PIN
References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGCLASS=?
Responses
+CGCLASS: (list of supported s)
SIM5320_ATC_V1.24 296
8/14/2012