AT Commands Set

SIM5320 AT Command Set
AT+CLIP
Set default value(=0,=0):
OK
Defined values
Parameter sets/shows the result code presentation status in the TA:
0 – disable
1 – enable
0 – CLIP not provisioned
1 – CLIP provisioned
2 – unknown (e.g. no network, etc.)
String type phone number of calling address in format specified by .
Type of address octet in integer format;
128 – Restricted number type includes unknown type and format
145 – International number type
161 – national number.The network support for this type is optional
177 – network specific number,ISDN format
129 – Otherwise
String type alphanumeric representation of corresponding to the entry found in phone
book.
0 – CLI valid
1 – CLI has been withheld by the originator
2 – CLI is not available due to interworking problems or limitations of originating
network
Examples
AT+CLIP=1
OK
RING (with incoming call)
+CLIP: "02152063113",128,,,"gongsi",0
6.6 AT+CLIR Calling line identification restriction
Description
SIM5320_ATC_V1.24 110
8/14/2012