CLIOwin 6.5 PCI User's Manual - Audiomatica Srl

, in a way as an on-off switch works; please refer to 5.4.3 for details. Here it is possible
to control the generation of single signal types and quickly pass from one to another.
When the generator control toolbar is active the following buttons are available:
SIN
Generates the currently defined sinusoid. The default sinusoid is 1031.25Hz
continuous.
2SIN
Generates the currently defined two tones signal. The default is1031.25Hz +
2062.5Hz, 50% each.
MLS
Generates the currently defined MLS sequence. The default is a 16383 MLS
sequence.
WHITE
Generates a white noise signal. It plays the white.sig file.
PINK
Generates a pink noise signal. It plays the pink13.sig file.
FILE
Generates the currently defined signal file. The default is the all4096.sig file.
SET
Enters the generator drop down menu to define the signals played by the various
buttons. See 5.4.3 for details.
+0.1dB
Increases the output level by 0.1dB. Equivalent to SHIFT+F8 or SHIFT+ main
toolbar button.
+1dB
Increases the output level by 1dB. Equivalent to F8 or the
-1dB
Decreases the output level by 1dB. Equivalent to F8 or the
main toolbar button.
main toolbar button.
-0.1dB
Decreases the output level by 0.1dB. Equivalent to SHIFT+F8 or SHIFT+ main
toolbar button.
8.3.2 THE MINIMIZED STATE
It is possible to operate the Multi-meter in what we call a 'minimized' state. Pressing
the relative button the control panel collapses and, in its place, remains a stay-on-thetop
display as in Fig.8.2.
Figure 8.2
Chapter 8 - Multi-Meter 71