QFP100 - TET - iSYSTEM
QFP100 - TET - iSYSTEM
QFP100 - TET - iSYSTEM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
_ V1.9<br />
Adapters<br />
<strong>QFP100</strong> - <strong>TET</strong><br />
Target CPU package: <strong>QFP100</strong><br />
Body size: 14 mm x 14 mm<br />
Pitch: 0.5 mm<br />
POD target layout: T_<strong>QFP100</strong>S<br />
Can be used with:<br />
• 78K0R/Fx3 ActiveGT POD<br />
• MPC5604P Active GT POD<br />
• MPC5604B Active GT POD<br />
• SPC56AP Active GT POD<br />
• NEC V850ES/Fx2 ActivePRO POD<br />
• NEC V850ES/Sx2 ActivePRO POD<br />
• NEC B850E/CG3 ActivePRO POD<br />
• NEC B850E/CG4 ActivePRO POD<br />
• NEC V850ES/GB1 ActivePOD<br />
• TMS470Pxx_3v3 Standard ActivePRO POD<br />
• TMS470R1VB8x SE4 ActivePRO POD<br />
• TMS470R1VB8 Standard ActivePRO POD<br />
• TMS470R1VB8 I/O Extended ActivePRO POD<br />
• 68HC08AZ POD<br />
• MC68LC302 POD<br />
• MC68LC302 Active POD<br />
Note that adapter solutions stated in the document can be used only with listed PODs. Disregarding<br />
this warning may result in hardware failure of the target and the emulation system.<br />
Available Adapter Parts (by ordering code):<br />
• IA100TQ-SOLDER<br />
Solder part, which is being soldered to the target.<br />
© <strong>iSYSTEM</strong>, August 2012 1/8
(Unit: mm)<br />
A B C D E K L<br />
16.5 1.125 17.0 17.0 2.15 19.55 19.55<br />
Recommended (by <strong>TET</strong>) PCB footprint size<br />
IA100TQ-SOLDER dimensions<br />
• IA100TQ-WIRE<br />
The IA100TQ-WIRE represents flexible connection between the POD and the target.<br />
© <strong>iSYSTEM</strong>, August 2012 2/8
• IA100TQ-FIXED<br />
The IA100TQ-FIXED represents fixed inflexible connection between the POD and the target.<br />
• IA100TQ-CPU<br />
The IA100TQ-CPU is used to connect the CPU directly to the target. Above picture does not show<br />
exactly the IA100TQ-CPU but IA144TQ-CPU which looks exactly the same considering that it has<br />
different pin count.<br />
• IA100TQEXT-CAB<br />
The IA100TQEXT-CAB is a 30 mm extension and can be used to extend the adapter. When used,<br />
it is connected on top of the IA100TQ-SOLDER.<br />
© <strong>iSYSTEM</strong>, August 2012 3/8
Flexible Adapter<br />
IA100TQ-WIRE and IA100TQ-SOLDER are essential parts required to adapt the POD to the target<br />
<strong>QFP100</strong> package. First, IA100TQ-SOLDER is soldered to the target and then the POD is connected<br />
via IA100TQ-WIRE.<br />
Assembly<br />
Pay attention to pin 1 while assembling the adapter and connecting the POD to the target. Improper<br />
use of the adapter or even incorrect adapter used with your particular POD can damage the emulation<br />
system and the target.<br />
1. First, solder IA100TQ-SOLDER to the target PCB.<br />
2. Next, connect the IA100TQ-WIRE to the POD.<br />
3. Finally, connect the POD via IA100TQ-WIRE to the target.<br />
Precaution must be taken after the POD is connected to the target. Adapter parts may break due to<br />
the user carelessness.<br />
© <strong>iSYSTEM</strong>, August 2012 4/8
Fixed Adapter<br />
IA100TQ-FIXED and IA100TQ-SOLDER are essential parts required to adapt the POD to the target<br />
<strong>QFP100</strong> package. First, IA100TQ-SOLDER is soldered to the target and then the POD is connected<br />
via IA100TQ-FIXED.<br />
A flexible adapter is recommended to be used with Active or ActivePRO POD since the parts of fixed<br />
adapter solution can easily break due to the Active and ActivePRO POD size and weight.<br />
Assembly<br />
Pay attention to pin 1 while assembling the adapter and connecting the POD to the target. Improper<br />
use of the adapter or even incorrect adapter used with your particular POD can damage the emulation<br />
system and the target.<br />
Phase 1: Solder IA100TQ-SOLDER to the target PCB.<br />
Phase 2: Connect IA100TQ-FIXED to the POD.<br />
If optionally IA100TQEXT-CAB is used, it must be connected to IA100TQ-FIXED now.<br />
© <strong>iSYSTEM</strong>, August 2012 5/8
Phase 3: Connect the POD to the target via IA100TQ-FIXED.<br />
Precaution must be taken after the POD is connected to the target. Adapter parts may break due to<br />
the user carelessness.<br />
© <strong>iSYSTEM</strong>, August 2012 6/8
Dimensions<br />
(Unit : mm) A B D E<br />
Fixed Adapter - <strong>QFP100</strong> 46 x 46 10 x 10 10 11<br />
© <strong>iSYSTEM</strong>, August 2012 7/8
Connecting the CPU directly to the target<br />
The CPU can be connected directly to the target using the IA100TQ-SOLDER in combination with the<br />
IA100TQ-CPU. This solution is very suitable for an ultimate test.<br />
Step 1: Solder the IA100TQ-SOLDER to the target PCB.<br />
Step 2: Insert the CPU into the IA100TQ-CPU, which then connects to the IA100TQ-SOLDER.<br />
Disclaimer: <strong>iSYSTEM</strong> assumes no responsibility for any errors which may appear in this document, reserves the<br />
right to change devices or specifications detailed herein at any time without notice, and does not make any<br />
commitment to update the information herein.<br />
© <strong>iSYSTEM</strong>. All rights reserved.<br />
© <strong>iSYSTEM</strong>, August 2012 8/8